eightball/all-in-one
1
0
Fork 0
mirror of https://github.com/nextcloud/all-in-one.git synced 2025-12-19 22:16:49 +00:00
Code Issues Projects Releases Packages Wiki Activity Actions 10

Merge pull request #5440 from nextcloud/enh/noid/add-rp-examples

Browse source 
rp-docs: add links to examples direclty to each rp section
This commit is contained in:
Simon L. 2024-10-21 15:38:51 +02:00 • committed by GitHub
commit 86e2d559d2
No known key found for this signature in database
GPG key ID: B5690EEEBB952194
2 changed files with 18 additions and 4 deletions
Download patch file Download diff file Expand all files Collapse all files

3
local-instance.md
View file

@ -9,7 +9,8 @@ The recommended way is the following:
1. Enter the ip-address of your local dns-server in the daemon.json file for docker so that you are sure that all docker containers use the correct local dns-server.
1. Now, entering the domain in the AIO-interface should work as expected and should allow you to continue with the setup
Here is a video that does shows this a bit more in detail: https://youtu.be/zk-y2wVkY4c
> [!TIP]
> You may have a look at [this video](https://youtu.be/zk-y2wVkY4c) for a more complete but possibly outdated example.
## 2. Use the ACME DNS-challenge
You can alternatively use the ACME DNS-challenge to get a valid certificate for Nextcloud. Here is described how to set it up: https://github.com/nextcloud/all-in-one#how-to-get-nextcloud-running-using-the-acme-dns-challenge

19
reverse-proxy.md
View file

@ -145,6 +145,9 @@ To make the config work you can run the following command:
<summary>click here to expand</summary>
> [!TIP]
> You may have a look at [this guide](https://github.com/nextcloud/all-in-one/discussions/575#discussion-4055615) for a more complete but possibly outdated example.
Add this to your Caddyfile:
```
@ -204,6 +207,10 @@ For a reverse proxy example guide for Citrix ADC VPX / Citrix Netscaler, see thi
<summary>click here to expand</summary>
> [!TIP]
> You may have a look at [this guide](https://github.com/nextcloud/all-in-one/discussions/2845#discussioncomment-6423237) for a more complete but possibly outdated example.
Although it does not seem like it is the case but from AIO perspective a Cloudflare Tunnel works like a reverse proxy. Please see the [caveats](https://github.com/nextcloud/all-in-one#notes-on-cloudflare-proxytunnel) before proceeding. Here is then how to make it work:
1. Install the Cloudflare Tunnel on the same machine where AIO will be running on and point the Tunnel with the domain that you want to use for AIO to `http://localhost:11000`.<br>
@ -317,6 +324,9 @@ backend Nextcloud
<summary>click here to expand</summary>
> [!TIP]
> You may have a look at [this guide](https://github.com/nextcloud/all-in-one/discussions/588#discussioncomment-2811152) for a more complete but possibly outdated example.
**Disclaimer:** This config was tested and should normally work on all modern Nginx versions. Improvements to the config are very welcome!
Add the below template to your Nginx config.
@ -401,8 +411,6 @@ server {
⚠️ **Please note:** look into [this](#adapting-the-sample-web-server-configurations-below) to adapt the above example configuration.
**Advice:** You may have a look at [this](https://github.com/nextcloud/all-in-one/discussions/588#discussioncomment-2811152) for a more complete example.
</details>
### Nginx-Proxy-Manager - NPM
@ -411,6 +419,9 @@ server {
<summary>click here to expand</summary>
> [!TIP]
> You may have a look at [this guide](https://github.com/nextcloud/all-in-one/discussions/588#discussioncomment-3040493) for a more complete but possibly oudated example.
First, make sure the environmental variables `PUID` and `PGID` in the `compose.yaml` file for NPM are either unset or set to `0`.
If you need to change the GID/PID then please add `net.ipv4.ip_unprivileged_port_start=0` at the end of `/etc/sysctl.conf`. Note: this will cause that non root users can bind privileged ports.
@ -560,6 +571,9 @@ See these screenshots for a working config:
<summary>click here to expand</summary>
> [!TIP]
> You may have a look at [this video](https://www.youtube.com/watch?v=VLPSRrLMDmA) for a more complete but possibly outdated example.
**Disclaimer:** it might be possible that the config below is not working 100% correctly, yet. Improvements to it are very welcome!
Traefik's building blocks (router, service, middlewares) need to be defined using dynamic configuration similar to [this](https://doc.traefik.io/traefik/providers/file/#configuration-examples) official Traefik configuration example. Using **docker labels _won't work_** because of the nature of the project.
@ -638,7 +652,6 @@ The examples below define the dynamic configuration in YAML files. If you rather
---
⚠️ **Please note:** look into [this](#adapting-the-sample-web-server-configurations-below) to adapt the above example configuration.
**Hint**: see https://www.youtube.com/watch?v=VLPSRrLMDmA for a video on configuring Traefik.
</details>