Merge branch 'main' into ench/noid/vulkan-ai

Signed-off-by: Jean-Yves <7360784+docjyJ@users.noreply.github.com>

.github/ISSUE_TEMPLATE/Bug_report.md

@@ -6,9 +6,10 @@ labels: 0. Needs triage
 
 <!---
 - Before submitting a bug report, please read through the documentation available at https://github.com/nextcloud/all-in-one#faq
-- If you use Cloudflare Tunnel or Cloudflare Proxy, see https://github.com/nextcloud/all-in-one#notes-on-cloudflare-proxytunnel for known issues/limitations and workarounds.
+- Additional documentation is available here: https://github.com/nextcloud/all-in-one/discussions/categories/wiki
-- For issues with Collabora or Talk, make sure to follow https://github.com/nextcloud/all-in-one/discussions/1358. It may already resolve your issue and makes it easier to help you.
+- You should also read through existing questions and their answer here: https://github.com/nextcloud/all-in-one/discussions/categories/questions
-
+- Additional threads can be found here: https://help.nextcloud.com/tag/aio
+- Existing feature requests are listed here: https://github.com/nextcloud/all-in-one/discussions/categories/ideas
 --->
 
 <!--- Please fill out the whole template below -->
@@ -29,4 +30,10 @@ labels: 0. Needs triage
 
 #### Docker run command or docker-compose file that you used
 
-#### Other valuable info <!--- (like logs, screenshots & Co.) -->
+#### Output of `sudo docker logs nextcloud-aio-mastercontainer`
+
+#### Output of `sudo docker inspect nextcloud-aio-mastercontainer`
+
+#### Output of `sudo docker ps -a`
+
+#### Other valuable info <!--- (like additional logs, screenshots & Co.) -->

.github/ISSUE_TEMPLATE/config.yml

@@ -3,15 +3,12 @@ contact_links:
     - name: 📘 Documentation on Nextcloud AIO
       url: https://github.com/nextcloud/all-in-one#faq
       about: Please read the docs first before submitting any report or request!
-    - name: ⛑️ General questions and support
+    - name: ⛑️ Questions and support
       url: https://help.nextcloud.com/tag/aio
-      about: For general questions, support and help
+      about: For questions, support and help
     - name: 💡 Suggest a new feature or discuss one
       url:  https://github.com/nextcloud/all-in-one/discussions/categories/ideas
       about: For new feature requests and discussion of existing ones
-    - name: ❓ Questions about Nextcloud AIO
-      url: https://github.com/nextcloud/all-in-one/discussions/categories/questions
-      about: For questions specifically about AIO
     - name: 💼 Nextcloud Enterprise
       url: https://portal.nextcloud.com/
       about: If you are a Nextcloud Enterprise customer, or need Professional support, so it can be resolved directly by our dedicated engineers more quickly

.github/dependabot.yml

@@ -10,6 +10,8 @@ updates:
   labels:
   - 3. to review
   - dependencies
+  cooldown:
+    default-days: 7
 - package-ecosystem: composer
   directory: "/php/"
   schedule:
@@ -55,6 +57,6 @@ updates:
     - dependency-name: "postgres"
       update-types: ["version-update:semver-major"]
     - dependency-name: "redis"
-      update-types: ["version-update:semver-major", "version-update:semver-minor"]
+      update-types: ["version-update:semver-major"]
     - dependency-name: "elasticsearch"
       update-types: ["version-update:semver-major"]

.github/workflows/codespell.yml

@@ -12,9 +12,9 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Check out code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
       - name: Check spelling
-        uses: codespell-project/actions-codespell@406322ec52dd7b488e48c1c4b82e2a8b3a1bf630 # v2
+        uses: codespell-project/actions-codespell@8f01853be192eb0f849a5c7d721450e7a467c579 # v2
         with:
           check_filenames: true
           check_hidden: true

.github/workflows/collabora.yml

@@ -0,0 +1,29 @@
+name: collabora-update
+
+on:
+  workflow_dispatch:
+  schedule:
+  - cron:  '00 12 * * *'
+
+jobs:
+  collabora-update:
+    name: update collabora
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v6.0.1
+    - name: Run collabora-profile-update
+      run: |
+        rm -f php/cool-seccomp-profile.json
+        wget https://raw.githubusercontent.com/CollaboraOnline/online/refs/heads/main/docker/cool-seccomp-profile.json
+        mv cool-seccomp-profile.json php/
+        
+    - name: Create Pull Request
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
+      with:
+        commit-message: collabora-seccomp-update automated change
+        signoff: true
+        title: collabora seccomp update
+        body: Automated collabora seccomp profile update
+        labels: dependencies, 3. to review
+        milestone: next
+        branch: collabora-seccomp-update

.github/workflows/community-containers.yml

@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
       - name: Validate structure
         run: |
           CONTAINERS="$(find ./community-containers -mindepth 1 -maxdepth 1 -type d)"

.github/workflows/dependency-updates.yml

@@ -10,8 +10,8 @@ jobs:
     name: Run dependency update script
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6.0.1
-    - uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+    - uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2
       with:
         php-version: 8.4
         extensions: apcu
@@ -44,7 +44,7 @@ jobs:
         )"
         sed -i "s|pecl install APCu.*\;|pecl install APCu-$apcu_version\;|" ./Containers/mastercontainer/Dockerfile
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
       with:
         commit-message: php dependency updates
         signoff: true

.github/workflows/docker-lint.yml

@@ -25,7 +25,7 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
 
       - name: Install hadolint
         run: |

.github/workflows/helm-release.yml

@@ -13,10 +13,10 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
 
       - name: Turnstyle
-        uses: softprops/turnstyle@807f6009e7cee5c2c9faa41ccef03a8bb24b06ab # v2
+        uses: softprops/turnstyle@e565d2d86403c5d23533937e95980570545e5586 # v2
         with:
           continue-after-seconds: 180
         env:
@@ -32,7 +32,7 @@ jobs:
 
       # See https://github.com/helm/chart-releaser-action/issues/6
       - name: Set up Helm
-        uses: azure/setup-helm@b9e51907a09c216f16ebe8536097933489208112 # v4
+        uses: azure/setup-helm@1a275c3b69536ee54be43f2070a358922e12c8d4 # v4
         with:
           version: v3.6.3
 

.github/workflows/imaginary-update.yml

@@ -10,7 +10,7 @@ jobs:
     name: update to latest imaginary commit on master branch
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6.0.1
     - name: Run imaginary-update
       run: |
         # Imaginary
@@ -22,7 +22,7 @@ jobs:
         sed -i "s|^ENV IMAGINARY_HASH.*$|ENV IMAGINARY_HASH=$imaginary_version|" ./Containers/imaginary/Dockerfile
         
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
       with:
         commit-message: imaginary-update automated change
         signoff: true

.github/workflows/json-validator.yml

@@ -16,7 +16,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
       - name: Validate Json
         run: |
           sudo apt-get update

.github/workflows/lint-helm.yml

@@ -11,12 +11,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
         with:
           fetch-depth: 0
 
       - name: Install Helm
-        uses: azure/setup-helm@b9e51907a09c216f16ebe8536097933489208112 # v4
+        uses: azure/setup-helm@1a275c3b69536ee54be43f2070a358922e12c8d4 # v4
         with:
           version: v3.11.1
 

.github/workflows/lint-php.yml

@@ -2,6 +2,9 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
+#
+# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
+# SPDX-License-Identifier: MIT
 
 name: Lint php
 
@@ -33,10 +36,12 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@8e8c483db84b4bee98b60c0593521ed34d9990e8 # v5.0.1
+        with:
+          persist-credentials: false
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2.36.0
         with:
           php-version: ${{ matrix.php-versions }}
           coverage: none

.github/workflows/lint-yaml.yml

@@ -0,0 +1,42 @@
+# This workflow is provided via the organization template repository
+#
+# https://github.com/nextcloud/.github
+# https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
+#
+# SPDX-FileCopyrightText: 2021-2024 Nextcloud GmbH and Nextcloud contributors
+# SPDX-License-Identifier: MIT
+
+name: Lint YAML
+
+on: 
+  pull_request:
+    paths:
+      - '**.yml'
+
+permissions:
+  contents: read
+
+jobs:
+  yaml-lint:
+    runs-on: ubuntu-latest
+
+    name: yaml
+
+    steps:
+      - name: Checkout
+        uses: actions/checkout@8e8c483db84b4bee98b60c0593521ed34d9990e8 # v6.0.1
+        with:
+          persist-credentials: false
+
+      - name: GitHub action templates lint
+        uses: ibiqlik/action-yamllint@2576378a8e339169678f9939646ee3ee325e845c # v3.1.1
+        with:
+          file_or_dir: .github/workflows
+          config_data: |
+            line-length: warning
+
+      - name: Install the latest version of uv
+        uses: astral-sh/setup-uv@61cb8a9741eeb8a550a1b8544337180c0fc8476b # v7.2.0
+
+      - name: Check GitHub actions
+        run: uvx zizmor --min-severity medium .github/workflows/*.yml

.github/workflows/lock-threads.yml

@@ -14,7 +14,7 @@ jobs:
   action:
     runs-on: ubuntu-latest
     steps:
-      - uses: dessant/lock-threads@1bf7ec25051fe7c00bdd17e6a7cf3d7bfb7dc771 # v5
+      - uses: dessant/lock-threads@7266a7ce5c1df01b1c6db85bf8cd86c737dadbe7 # v5
         with: 
           issue-inactive-days: '14'
           process-only: 'issues'

.github/workflows/nextcloud-update.yml

@@ -11,7 +11,7 @@ jobs:
     name: Run nextcloud-update script
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6.0.1
     - name: Run nextcloud-update script
       run: |
         # Inspired by https://github.com/nextcloud/docker/blob/master/update.sh
@@ -79,7 +79,7 @@ jobs:
         fi
 
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
       with:
         commit-message: nextcloud-update automated change
         signoff: true

.github/workflows/php-deprecation-detector.yml

@@ -16,9 +16,9 @@ jobs:
     name: PHP Deprecation Detector
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6.0.1
       - name: Set up php
-        uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/playwright-on-push.yml

@@ -0,0 +1,123 @@
+name: Playwright Tests on push
+
+on:
+  pull_request:
+    paths:
+      - 'php/**'
+  push:
+    branches:
+      - main
+    paths:
+      - 'php/**'
+
+concurrency:
+  group: playwright-${{ github.head_ref || github.run_id }}
+  cancel-in-progress: true
+
+env:
+  BASE_URL: https://localhost:8080
+
+jobs:
+  test:
+    timeout-minutes: 60
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v6.0.1
+
+      - uses: actions/setup-node@v6
+        with:
+          node-version: lts/*
+
+      - name: Install dependencies
+        run: cd php/tests && npm ci
+
+      - name: Install Playwright Browsers
+        run: cd php/tests && npx playwright install --with-deps chromium
+
+      - name: Set up php 8.4
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2.36.0
+        with:
+          extensions: apcu
+          php-version: 8.4
+          coverage: none
+          ini-file: development
+        env:
+          GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
+
+      - name: Adjust some things and fix permissions
+        run: |
+          cd php
+          rm -r ./data
+          rm -r ./session
+          composer install --no-dev
+          composer clear-cache
+          sudo chmod 777 -R ./
+
+      - name: Start fresh development server
+        run: |
+          docker rm --force nextcloud-aio-{mastercontainer,apache,notify-push,nextcloud,redis,database,domaincheck,whiteboard,imaginary,talk,collabora,borgbackup} || true
+          docker volume rm nextcloud_aio_{mastercontainer,apache,database,database_dump,nextcloud,nextcloud_data,redis,backup_cache,elasticsearch} || true
+          docker pull ghcr.io/nextcloud-releases/all-in-one:develop
+          docker run \
+            -d \
+            --init \
+            --name nextcloud-aio-mastercontainer \
+            --restart always \
+            --publish 8080:8080 \
+            --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
+            --volume ./php:/var/www/docker-aio/php \
+            --volume /var/run/docker.sock:/var/run/docker.sock:ro \
+            --env SKIP_DOMAIN_VALIDATION=true \
+            --env APACHE_PORT=11000 \
+            ghcr.io/nextcloud-releases/all-in-one:develop
+          echo Waiting for 10 seconds for the development container to start ...
+          sleep 10
+
+      - name: Run Playwright tests for initial setup
+        run: |
+          cd php/tests
+          export DEBUG=pw:api
+          if ! npx playwright test tests/initial-setup.spec.js; then
+            docker logs nextcloud-aio-mastercontainer
+            docker logs nextcloud-aio-borgbackup
+            exit 1
+          fi
+
+      - name: Start fresh development server
+        run: |
+          docker rm --force nextcloud-aio-{mastercontainer,apache,notify-push,nextcloud,redis,database,domaincheck,whiteboard,imaginary,talk,collabora,borgbackup} || true
+          docker volume rm nextcloud_aio_{mastercontainer,apache,database,database_dump,nextcloud,nextcloud_data,redis,backup_cache,elasticsearch} || true
+          docker run \
+            -d \
+            --init \
+            --name nextcloud-aio-mastercontainer \
+            --restart always \
+            --publish 8080:8080 \
+            --volume nextcloud_aio_mastercontainer:/mnt/docker-aio-config \
+            --volume ./php:/var/www/docker-aio/php \
+            --volume /var/run/docker.sock:/var/run/docker.sock:ro \
+            --env SKIP_DOMAIN_VALIDATION=false \
+            --env APACHE_PORT=11000 \
+            ghcr.io/nextcloud-releases/all-in-one:develop
+          echo Waiting for 10 seconds for the development container to start ...
+          sleep 10
+
+      - name: Run Playwright tests for backup restore
+        run: |
+          cd php/tests 
+          export DEBUG=pw:api
+          if ! npx playwright test tests/restore-instance.spec.js; then
+            docker logs nextcloud-aio-mastercontainer
+            docker logs nextcloud-aio-borgbackup
+            exit 1
+          fi
+
+      - uses: actions/upload-artifact@v6
+        if: ${{ !cancelled() }}
+        with:
+          name: playwright-report
+          path: php/tests/playwright-report/
+          retention-days: 14
+          overwrite: true

.github/workflows/playwright-on-workflow-dispatch.yml

@@ -13,9 +13,9 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6.0.1
 
-      - uses: actions/setup-node@v4
+      - uses: actions/setup-node@v6
         with:
           node-version: lts/*
 
@@ -45,7 +45,14 @@ jobs:
           sleep 10
 
       - name: Run Playwright tests for initial setup
-        run: cd php/tests && DEBUG=pw:api npx playwright test tests/initial-setup.spec.js
+        run: |
+          cd php/tests
+          export DEBUG=pw:api
+          if ! npx playwright test tests/initial-setup.spec.js; then
+            docker logs nextcloud-aio-mastercontainer
+            docker logs nextcloud-aio-borgbackup
+            exit 1
+          fi
 
       - name: Start fresh development server
         run: |
@@ -66,9 +73,16 @@ jobs:
           sleep 10
 
       - name: Run Playwright tests for backup restore
-        run: cd php/tests && DEBUG=pw:api npx playwright test tests/restore-instance.spec.js
+        run: |
+          cd php/tests 
+          export DEBUG=pw:api
+          if ! npx playwright test tests/restore-instance.spec.js; then
+            docker logs nextcloud-aio-mastercontainer
+            docker logs nextcloud-aio-borgbackup
+            exit 1
+          fi
 
-      - uses: actions/upload-artifact@v4
+      - uses: actions/upload-artifact@v6
         if: ${{ !cancelled() }}
         with:
           name: playwright-report

.github/workflows/psalm-update-baseline.yml

@@ -10,10 +10,10 @@ jobs:
     runs-on: ubuntu-latest
 
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6.0.1
 
       - name: Set up php
-        uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2
         with:
           php-version: 8.4
           extensions: apcu
@@ -30,7 +30,7 @@ jobs:
         continue-on-error: true
 
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+        uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
         with:
           token: ${{ secrets.COMMAND_BOT_PAT }}
           commit-message: Update psalm baseline

.github/workflows/psalm.yml

@@ -2,6 +2,9 @@
 #
 # https://github.com/nextcloud/.github
 # https://docs.github.com/en/actions/learn-github-actions/sharing-workflows-with-your-organization
+#
+# SPDX-FileCopyrightText: 2022-2024 Nextcloud GmbH and Nextcloud contributors
+# SPDX-License-Identifier: MIT
 
 name: Static analysis
 
@@ -19,6 +22,9 @@ concurrency:
   group: psalm-${{ github.head_ref || github.run_id }}
   cancel-in-progress: true
 
+permissions:
+  contents: read
+
 jobs:
   static-analysis:
     runs-on: ubuntu-latest
@@ -26,15 +32,19 @@ jobs:
     name: static-psalm-analysis
     steps:
       - name: Checkout
-        uses: actions/checkout@b4ffde65f46336ab88eb53be808477a3936bae11 # v4.1.1
+        uses: actions/checkout@8e8c483db84b4bee98b60c0593521ed34d9990e8 # v5.0.1
+        with:
+          persist-credentials: false
 
       - name: Set up php
-        uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2.36.0
         with:
           php-version: 8.4
           extensions: apcu
           coverage: none
           ini-file: development
+          # Temporary workaround for missing pcntl_* in PHP 8.3
+          ini-values: disable_functions=
         env:
           GITHUB_TOKEN: ${{ secrets.GITHUB_TOKEN }}
 

.github/workflows/shellcheck.yml

@@ -15,7 +15,7 @@ jobs:
     name: Check Shell
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6.0.1
     - name: Run Shellcheck
       uses: ludeeus/action-shellcheck@00cae500b08a931fb5698e11e79bfbd38e612a38 # v2.0.0
       with:

.github/workflows/talk.yml

@@ -10,7 +10,7 @@ jobs:
     name: update talk
     runs-on: ubuntu-latest
     steps:
-    - uses: actions/checkout@v4
+    - uses: actions/checkout@v6.0.1
     - name: Run talk-container-update
       run: |
         # Recording
@@ -45,7 +45,7 @@ jobs:
         sed -i "s|^ARG JANUS_VERSION=.*$|ARG JANUS_VERSION=$janus_version|" ./Containers/talk/Dockerfile
         
     - name: Create Pull Request
-      uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
       with:
         commit-message: talk-update automated change
         signoff: true

.github/workflows/twig-lint.yml

@@ -24,10 +24,10 @@ jobs:
 
     steps:
       - name: Checkout
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
 
       - name: Set up php ${{ matrix.php-versions }}
-        uses: shivammathur/setup-php@0f7f1d08e3e32076e51cae65eb0b0c871405b16e # v2
+        uses: shivammathur/setup-php@7bf05c6b704e0b9bfee22300130a31b5ea68d593 # v2
         with:
           php-version: 8.4
           extensions: apcu

.github/workflows/update-copyright.yml

@@ -8,4 +8,4 @@ jobs:
     name: update copyright
     runs-on: ubuntu-latest
     steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v6.0.1

.github/workflows/update-helm.yml

@@ -11,7 +11,7 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
       - name: update helm chart
         run: |
           set -x
@@ -23,7 +23,7 @@ jobs:
             sudo bash nextcloud-aio-helm-chart/update-helm.sh "$DOCKER_TAG"
           fi
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+        uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
         with:
           commit-message: Helm Chart updates
           signoff: true

.github/workflows/update-yaml.yml

@@ -11,12 +11,12 @@ jobs:
     runs-on: ubuntu-latest
     steps:
       - name: Checkout code
-        uses: actions/checkout@v4
+        uses: actions/checkout@v6.0.1
       - name: update yaml files
         run: |
           sudo bash manual-install/update-yaml.sh
       - name: Create Pull Request
-        uses: peter-evans/create-pull-request@271a8d0340265f705b14b6d32b9829c1cb33d45e # v7
+        uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
         with:
           commit-message: Yaml updates
           signoff: true

.github/workflows/watchtower-update.yml

@@ -0,0 +1,37 @@
+name: watchtower-update
+
+on:
+  workflow_dispatch:
+  schedule:
+  - cron:  '00 12 * * *'
+
+jobs:
+  watchtower-update:
+    name: update watchtower
+    runs-on: ubuntu-latest
+    steps:
+    - uses: actions/checkout@v6.0.1
+    - name: Run watchtower-container-update
+      run: |
+        # Watchtower
+        watchtower_version="$(
+          git ls-remote https://github.com/nicholas-fedor/watchtower v* \
+            | cut -d/ -f3 \
+            | sort -V \
+            | grep -E "^v[0-9\.]+$" \
+            | tail -1
+        )"
+        watchtower_commit_hash="$(git ls-remote https://github.com/nicholas-fedor/watchtower $watchtower_version | sed 's/refs.*//')"
+        sed -i "s|^ENV WATCHTOWER_COMMIT_HASH.*$|ENV WATCHTOWER_COMMIT_HASH=$watchtower_commit_hash|" ./Containers/watchtower/Dockerfile
+        sed -i "s|\$WATCHTOWER_COMMIT_HASH.*$|\$WATCHTOWER_COMMIT_HASH # $watchtower_version|" ./Containers/watchtower/Dockerfile
+        
+    - name: Create Pull Request
+      uses: peter-evans/create-pull-request@22a9089034f40e5a961c8808d113e2c98fb63676 # v7
+      with:
+        commit-message: watchtower-update automated change
+        signoff: true
+        title: watchtower container update
+        body: Automated watchtower container update
+        labels: dependencies, 3. to review
+        milestone: next
+        branch: watchtower-container-update

Containers/alpine/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a

Containers/apache/Caddyfile

@@ -15,6 +15,7 @@
 }
 
 https://{$ADDITIONAL_TRUSTED_DOMAIN}:443,
+http://{$APACHE_HOST}:23973, # For Collabora callback and WOPI requests, see containers.json
 {$PROTOCOL}://{$NC_DOMAIN}:{$APACHE_PORT} {
     header -Server
     header -X-Powered-By

Containers/apache/Dockerfile

@@ -1,8 +1,8 @@
 # syntax=docker/dockerfile:latest
-FROM caddy:2.10.0-alpine AS caddy
+FROM caddy:2.10.2-alpine AS caddy
 
 # From https://github.com/docker-library/httpd/blob/master/2.4/alpine/Dockerfile
-FROM httpd:2.4.63-alpine3.21
+FROM httpd:2.4.66-alpine3.23
 
 COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
 
@@ -88,4 +88,5 @@ CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/apache/start.sh

@@ -46,7 +46,9 @@ echo "$CADDYFILE" > /tmp/Caddyfile
 
 # Change the trusted_proxies in case of reverse proxies
 if [ "$APACHE_PORT" != '443' ]; then
-    CADDYFILE="$(sed 's|# trusted_proxies placeholder|trusted_proxies static private_ranges|' /tmp/Caddyfile)"
+    # Here the 100.64.0.0/10 range gets added which is the CGNAT range used by Tailscale nodes
+    # See https://github.com/nextcloud/all-in-one/pull/6703 for reference
+    CADDYFILE="$(sed 's|# trusted_proxies placeholder|trusted_proxies static private_ranges 100.64.0.0/10|' /tmp/Caddyfile)"
 else
     CADDYFILE="$(sed "s|# trusted_proxies placeholder|trusted_proxies static $IPv4_ADDRESS|" /tmp/Caddyfile)"
 fi
@@ -64,6 +66,11 @@ caddy fmt --overwrite /tmp/Caddyfile
 # Add caddy path
 mkdir -p /mnt/data/caddy/
 
+# Fix caddy startup
+if [ -d "/mnt/data/caddy/locks" ]; then
+    rm -rf /mnt/data/caddy/locks/*
+fi
+
 # Fix apache startup
 rm -f /usr/local/apache2/logs/httpd.pid
 

Containers/borgbackup/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 
 RUN set -ex; \
     \
@@ -24,5 +24,6 @@ ENTRYPOINT ["/start.sh"]
 USER root
 
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"
 ENV BORG_RETENTION_POLICY="--keep-within=7d --keep-weekly=4 --keep-monthly=6"

Containers/borgbackup/backupscript.sh

@@ -138,11 +138,6 @@ if [ "$BORG_MODE" = backup ]; then
         NEW_REPOSITORY=1
         if ! borg init --debug --encryption=repokey-blake2; then
             echo "Could not initialize borg repository."
-            if [ -z "$BORG_REMOTE_REPO" ]; then
-                # Originally we checked for presence of the config file instead of calling `borg info`. Likely `borg info`
-                # will error on a partially initialized repo, so this line is probably no longer necessary
-                rm -f "$BORG_BACKUP_DIRECTORY/config"
-            fi
             exit 1
         fi
 
@@ -199,7 +194,7 @@ if [ "$BORG_MODE" = backup ]; then
     if [ -f "/nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/.noaiobackup" ]; then
         BORG_EXCLUDE+=(--exclude "/nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/")
         BORG_INCLUDE+=(--pattern="+/nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/.noaiobackup")
-        echo "⚠️⚠️⚠️ '.noaiobackup' file was found in Nextclouds data directory. Excluding the data directory from backup!"
+        echo "⚠️⚠️⚠️ '.noaiobackup' file was found in Nextcloud's data directory. Excluding the data directory from backup!"
     # Exclude preview folder if .noaiobackup file was found
     elif [ -f /nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/appdata_*/preview/.noaiobackup ]; then
         BORG_EXCLUDE+=(--exclude "/nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/appdata_*/preview/")
@@ -344,7 +339,7 @@ if [ "$BORG_MODE" = restore ]; then
         ADDITIONAL_RSYNC_EXCLUDES=(--exclude "nextcloud_aio_nextcloud_data/**")
         ADDITIONAL_BORG_EXCLUDES=(--exclude "sh:nextcloud_aio_volumes/nextcloud_aio_nextcloud_data/**")
         ADDITIONAL_FIND_EXCLUDES=(-o -regex 'nextcloud_aio_volumes/nextcloud_aio_nextcloud_data\(/.*\)?')
-        echo "⚠️⚠️⚠️ '.noaiobackup' file was found in Nextclouds data directory. Excluding the data directory from restore!"
+        echo "⚠️⚠️⚠️ '.noaiobackup' file was found in Nextcloud's data directory. Excluding the data directory from restore!"
         echo "You might run into problems due to this afterwards as potentially this makes the directory go out of sync with the database."
         echo "You might be able to fix this by running 'occ files:scan --all' and 'occ maintenance:repair' and 'occ files:scan-app-data' after the restore."
         echo "See https://github.com/nextcloud/all-in-one#how-to-run-occ-commands"
@@ -617,3 +612,12 @@ if [ "$BORG_MODE" = test ]; then
         fi
     fi
 fi
+
+if [ "$BORG_MODE" = list ]; then
+    echo "Updating backup list..."
+    if ! borg info > /dev/null; then
+        echo "Could not update the backup list."
+        exit 1
+    fi
+    # The update gets done automatically in the wrapper start.sh script.
+fi

Containers/borgbackup/start.sh

@@ -32,8 +32,8 @@ else
 fi
 
 # Validate BORG_MODE
-if [ "$BORG_MODE" != backup ] && [ "$BORG_MODE" != restore ] && [ "$BORG_MODE" != check ] && [ "$BORG_MODE" != "check-repair" ] && [ "$BORG_MODE" != test ]; then
+if [ "$BORG_MODE" != backup ] && [ "$BORG_MODE" != restore ] && [ "$BORG_MODE" != check ] && [ "$BORG_MODE" != "check-repair" ] && [ "$BORG_MODE" != "test" ] && [ "$BORG_MODE" != "list" ]; then
-    echo "No correct BORG_MODE mode applied. Valid are 'backup', 'check', 'restore' and 'test'."
+    echo "No correct BORG_MODE mode applied. Valid are 'backup', 'check', 'restore', 'test' and 'list'."
     exit 1
 fi
 

Containers/clamav/Dockerfile

@@ -1,27 +1,38 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \
-    apk add --no-cache tzdata clamav supervisor bash; \
+    apk add --no-cache tzdata clamav clamav-milter supervisor bash; \
-    mkdir -p /run/clamav /var/log/supervisord /var/run/supervisord; \
+    mkdir -p /tmp /var/lib/clamav /run/clamav /var/log/supervisord /var/run/supervisord; \
-    chmod 777 -R /run/clamav /var/log/clamav /var/log/supervisord /var/run/supervisord; \
+    chmod 777 -R /tmp /run/clamav /var/log/clamav /var/log/supervisord /var/run/supervisord; \
+    chown -R 100:100 /var/lib/clamav; \
     sed -i "s|#\?MaxDirectoryRecursion.*|MaxDirectoryRecursion 30|g" /etc/clamav/clamd.conf; \
-    sed -i "s|#\?MaxFileSize.*|MaxFileSize 2G|g" /etc/clamav/clamd.conf; \
+    sed -i "s|#\?MaxScanSize.*|MaxScanSize 2000M|g" /etc/clamav/clamd.conf; \
-    sed -i "s|#\?PCREMaxFileSize.*|PCREMaxFileSize aio-placeholder|g" /etc/clamav/clamd.conf; \
+    sed -i "s|#\?MaxFileSize.*|MaxFileSize 2000M|g" /etc/clamav/clamd.conf; \
-    sed -i "s|#\?StreamMaxLength.*|StreamMaxLength aio-placeholder|g" /etc/clamav/clamd.conf; \
+    sed -i "s|#\?PCREMaxFileSize.*|PCREMaxFileSize 2000M|g" /etc/clamav/clamd.conf; \
+# StreamMaxLength must be synced with av_stream_max_length inside the Nextcloud files_antivirus plugin
+    sed -i "s|#\?StreamMaxLength.*|StreamMaxLength 2000M|g" /etc/clamav/clamd.conf; \
     sed -i "s|#\?TCPSocket|TCPSocket|g" /etc/clamav/clamd.conf; \
     sed -i "s|^LocalSocket .*|LocalSocket /tmp/clamd.sock|g" /etc/clamav/clamd.conf; \
-    freshclam --foreground --stdout
+    sed -i "s|Example| |g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?MilterSocket inet:7357|MilterSocket inet:7357|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?ClamdSocket unix:/run/clamav/clamd.sock|ClamdSocket unix:/tmp/clamd.sock|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?OnInfected Quarantine|OnInfected Reject|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?AddHeader Replace|AddHeader Add|g" /etc/clamav/clamav-milter.conf; \
+    sed -i "s|#\?Foreground yes|Foreground yes|g" /etc/clamav/clamav-milter.conf
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 COPY --chmod=664 supervisord.conf /supervisord.conf
 
 USER 100
+RUN set -ex; \
+    freshclam --foreground --stdout
 VOLUME /var/lib/clamav
 ENTRYPOINT ["/start.sh"]
 CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"
 HEALTHCHECK --start-period=60s --retries=9 CMD /healthcheck.sh

Containers/clamav/start.sh

@@ -1,6 +1,7 @@
 #!/bin/bash
 
-sed "s|aio-placeholder|$MAX_SIZE|" /etc/clamav/clamd.conf > /tmp/clamd.conf
+# Print out clamav version for compliance reasons
+clamscan --version
 
 echo "Clamav started"
 

Containers/clamav/supervisord.conf

@@ -13,11 +13,18 @@ stdout_logfile=/dev/stdout
 stdout_logfile_maxbytes=0
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
-command=freshclam --foreground --stdout --daemon --daemon-notify=/tmp/clamd.conf
+command=freshclam --foreground --stdout --daemon --daemon-notify=/etc/clamav/clamd.conf
 
 [program:clamd]
 stdout_logfile=/dev/stdout
 stdout_logfile_maxbytes=0
 stderr_logfile=/dev/stderr
 stderr_logfile_maxbytes=0
-command=clamd --foreground --config-file=/tmp/clamd.conf
+command=clamd --foreground --config-file=/etc/clamav/clamd.conf
+
+[program:milter]
+stdout_logfile=/dev/stdout
+stdout_logfile_maxbytes=0
+stderr_logfile=/dev/stderr
+stderr_logfile_maxbytes=0
+command=clamav-milter --config-file=/etc/clamav/clamav-milter.conf

Containers/collabora-online/Dockerfile

@@ -0,0 +1,16 @@
+# syntax=docker/dockerfile:latest
+# From https://gitlab.collabora.com/collabora-online/docker
+# hadolint ignore=DL3007
+FROM registry.gitlab.collabora.com/collabora-online/docker:latest
+
+USER root
+ARG DEBIAN_FRONTEND=noninteractive
+
+COPY --chmod=775 healthcheck.sh /healthcheck.sh
+
+USER 1001
+
+HEALTHCHECK --start-period=60s --retries=9 CMD /healthcheck.sh
+LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
+    org.label-schema.vendor="Nextcloud"

Containers/collabora-online/healthcheck.sh

@@ -0,0 +1,7 @@
+#!/bin/bash
+
+# Unfortunately, no curl and no nc is installed in the container 
+# and packages can also not be added as the package list is broken.
+# So always exiting 0 for now.
+# nc http://127.0.0.1:9980 || exit 1
+exit 0

Containers/collabora/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From a file located probably somewhere here: https://github.com/CollaboraOnline/online/blob/master/docker/from-packages/Dockerfile
-FROM collabora/code:25.04.3.1.1
+FROM collabora/code:25.04.8.1.1
 
 USER root
 ARG DEBIAN_FRONTEND=noninteractive
@@ -11,4 +11,5 @@ USER 1001
 
 HEALTHCHECK --start-period=60s --retries=9 CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/docker-socket-proxy/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM haproxy:3.2.2-alpine
+FROM haproxy:3.3.1-alpine
 
 # hadolint ignore=DL3002
 USER root
@@ -19,4 +19,5 @@ COPY --chmod=664 haproxy.cfg /haproxy.cfg
 ENTRYPOINT ["/start.sh"]
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/domaincheck/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash lighttpd netcat-openbsd; \
@@ -18,4 +18,5 @@ ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD nc -z 127.0.0.1 $APACHE_PORT || exit 1
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/fulltextsearch/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # Probably from here https://github.com/elastic/elasticsearch/blob/main/distribution/docker/src/docker/Dockerfile
-FROM elasticsearch:8.18.2
+FROM elasticsearch:8.19.10
 
 USER root
 
@@ -22,5 +22,6 @@ USER 1000:0
 
 HEALTHCHECK --interval=10s --timeout=5s --start-period=1m --retries=5 CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"
 ENV ES_JAVA_OPTS="-Xms512M -Xmx512M"

Containers/imaginary/Dockerfile

@@ -1,7 +1,7 @@
 # syntax=docker/dockerfile:latest
-FROM golang:1.24.4-alpine3.21 AS go
+FROM golang:1.25.6-alpine3.23 AS go
 
-ENV IMAGINARY_HASH=1d4e251cfcd58ea66f8361f8721d7b8cc85002a3
+ENV IMAGINARY_HASH=6a274b488759a896aff02f52afee6e50b5e3a3ee
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \
@@ -14,7 +14,7 @@ RUN set -ex; \
         build-base; \
     go install github.com/h2non/imaginary@"$IMAGINARY_HASH";
 
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache \
@@ -43,4 +43,5 @@ ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/mastercontainer/Dockerfile

@@ -1,23 +1,30 @@
 # syntax=docker/dockerfile:latest
 # Docker CLI is a requirement
-FROM docker:28.3.0-cli AS docker
+FROM docker:29.1.5-cli AS docker
 
 # Caddy is a requirement
-FROM caddy:2.10.0-alpine AS caddy
+FROM caddy:2.10.2-alpine AS caddy
 
-# From https://github.com/docker-library/php/blob/master/8.4/alpine3.21/fpm/Dockerfile
+# From https://github.com/docker-library/php/blob/master/8.4/alpine3.23/fpm/Dockerfile
-FROM php:8.4.8-fpm-alpine3.21
+FROM php:8.4.17-fpm-alpine3.23
-
-ARG AIO_GIT_URL="https://github.com/nextcloud-releases/all-in-one.git"
-ARG AIO_GIT_BRANCH="main"
 
 EXPOSE 80
 EXPOSE 8080
 EXPOSE 8443
 
+# Overwrite home variable for subservices
+ENV HOME=/var/www
+
 COPY --from=caddy /usr/bin/caddy /usr/bin/caddy
 COPY --from=docker /usr/local/bin/docker /usr/local/bin/docker
 
+COPY community-containers /var/www/docker-aio/community-containers
+COPY php /var/www/docker-aio/php
+COPY --chmod=775 Containers/mastercontainer/*.sh /
+COPY --chmod=664 Containers/mastercontainer/Caddyfile /Caddyfile
+COPY --chmod=664 Containers/mastercontainer/supervisord.conf /supervisord.conf
+COPY Containers/mastercontainer/mastercontainer.conf /etc/apache2/sites-available/mastercontainer.conf
+
 WORKDIR /var/www/docker-aio
 
 # hadolint ignore=SC2086,DL3047,DL3003,DL3004
@@ -45,7 +52,7 @@ RUN set -ex; \
     apk add --no-cache --virtual .build-deps \
         autoconf \
         build-base; \
-    pecl install APCu-5.1.24; \
+    pecl install APCu-5.1.28; \
     docker-php-ext-enable apcu; \
     rm -r /tmp/pear; \
     runDeps="$( \
@@ -67,13 +74,11 @@ RUN set -ex; \
     wget https://getcomposer.org/installer -O - | php -- --install-dir=/usr/local/bin --filename=composer; \
     chmod +x /usr/local/bin/composer; \
     cd /var/www/docker-aio; \
-    git clone "$AIO_GIT_URL" --depth 1 --single-branch --branch "$AIO_GIT_BRANCH" .; \
-    find ./ -maxdepth 1 -mindepth 1 -not -path ./php -not -path ./community-containers -exec rm -r {} \; ; \
     rm -r ./php/tests; \
     chown www-data:www-data -R /var/www/docker-aio; \
     cd php; \
-    sudo -u www-data composer install --no-dev; \
+    sudo -E -u www-data composer install --no-dev; \
-    sudo -u www-data composer clear-cache; \
+    sudo -E -u www-data composer clear-cache; \
     cd ..; \
     rm -f /usr/local/bin/composer; \
     chmod -R 770 /var/www/docker-aio; \
@@ -120,12 +125,10 @@ RUN set -ex; \
     mkdir /var/log/supervisord; \
     mkdir /var/run/supervisord;
 
-COPY --chmod=775 *.sh /
+# hadolint ignore=DL3048
-COPY --chmod=664 Caddyfile /Caddyfile
+LABEL org.label-schema.vendor="Nextcloud" \
-COPY --chmod=664 supervisord.conf /supervisord.conf
+    wud.watch="false" \
-COPY mastercontainer.conf /etc/apache2/sites-available/mastercontainer.conf
+    com.docker.compose.project="nextcloud-aio"
-
-LABEL org.label-schema.vendor="Nextcloud"
 
 # hadolint ignore=DL3002
 USER root

Containers/mastercontainer/README.md

@@ -0,0 +1,69 @@
+# Nextcloud All-in-One `mastercontainer`
+
+This folder contains the OCI/Docker container definition, along with associated resources and
+configuration files, for building the `mastercontainer` as part of the Nextcloud All-in-One
+project. This container hosts [the Nextcloud AIO interface](
+https://github.com/nextcloud/all-in-one/tree/main/php)[^app], and a dedicated PHP environment
+for it (which is completely independent of the Nextcloud Server).
+
+## Overview
+
+The mastercontainer acts as the central orchestration service for the deployment and management
+of all other containers in the Nextcloud All-in-One stack. It hosts:
+
+- A dedicated PHP SAPI/backend (php-fpm) for AIO itself (not Nextcloud Server)
+- An Apache service for accessing the AIO interface via a self-signed HTTPS VirtualHost on 8080/tcp
+- A Caddy reverse proxy service enabling HTTPS access to the AIO frontend on port 8443/tcp.
+  - Caddy will automatically issue a Let's Encrypt issued certificate if port 80 and 8443
+    is open/forwarded and a domain pointer is in place; then, simply open the Nextcloud AIO interface using the
+    domain (`https://your-domain-that-points-to-this-server.tld:8443`). The Let's Encrypt certificate request will
+    use an [ACME HTTP-01](https://letsencrypt.org/docs/challenge-types/#http-01-challenge) challenge.
+- Miscellaneous support services specific to AIO (backup management, health checks, etc.)
+
+## Key Responsibilities
+
+- Orchestrates the deployment and lifecycle of all Nextcloud service containers
+- Handles initial setup and container configuration
+- Coordinates image updates
+- Monitors general system health
+
+It triggers the initial installation and ensures the smooth operation of the Nextcloud
+All-in-One stack.
+
+## Contents
+
+- **Dockerfile**: Instructions for building the mastercontainer image.
+- **Entrypoint script**: The `start.sh` script is used for container initialization and runtime
+  configuration before starting supervisord.
+- [**Nextcloud All-in-One Controller App**](https://github.com/nextcloud/all-in-one/tree/main/php): The
+  core AIO orchestrator that handles configuration and settings for the containers.
+- **Supervisor**: The `supervisord.conf` file defines the long-running services hosted within
+  the container (php-fpm, cron, etc.)
+
+## Usage
+
+This container should be used as the trigger image when deploying the Nextcloud All-in-One
+stack in a Docker or other OCI-compliant container environment. For detailed deployment
+instructions, refer to the [project documentation](
+https://github.com/nextcloud/all-in-one).
+
+## Related Resources
+
+- [Main Repository](https://github.com/nextcloud/all-in-one)
+- [Documentation](https://github.com/nextcloud/all-in-one#readme)
+
+## Contributing
+
+Contributions are welcome! Please follow the Nextcloud project's guidelines and submit pull
+requests or issues via the main repository.
+
+## License
+
+This folder and its contents are licensed under the
+[GNU AGPLv3](https://www.gnu.org/licenses/agpl-3.0.html), in line with the rest of Nextcloud
+All-in-One.
+
+[^app]: The Nextcloud All-in-One interface allows users to install, configure, and
+manage their Nextcloud instance and related containers via a secure web interface and API.
+It automates and simplifies complex tasks such as container orchestration, backups, updates,
+and service management for users deploying Nextcloud in Docker environments.

Containers/mastercontainer/cron.sh

@@ -45,29 +45,29 @@ while true; do
 
     # Check for updates and send notification if yes on saturdays
     if [ "$(date +%u)" = 6 ]; then
-        sudo -u www-data php /var/www/docker-aio/php/src/Cron/UpdateNotification.php
+        sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/UpdateNotification.php
     fi
 
     # Check if AIO is outdated
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/OutdatedNotification.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/OutdatedNotification.php
 
     # Remove sessions older than 24h
     find "/mnt/docker-aio-config/session/" -mindepth 1 -mmin +1440 -delete
 
     # Remove nextcloud-aio-domaincheck container
-    if sudo -u www-data docker ps --format "{{.Names}}" --filter "status=exited" | grep -q "^nextcloud-aio-domaincheck$"; then
+    if sudo -E -u www-data docker ps --format "{{.Names}}" --filter "status=exited" | grep -q "^nextcloud-aio-domaincheck$"; then
-        sudo -u www-data docker container remove nextcloud-aio-domaincheck
+        sudo -E -u www-data docker container remove nextcloud-aio-domaincheck
     fi
 
     # Remove dangling images
-    sudo -u www-data docker image prune --force
+    sudo -E -u www-data docker image prune --filter "label=org.label-schema.vendor=Nextcloud" --force
 
     # Check for available free space
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/CheckFreeDiskSpace.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/CheckFreeDiskSpace.php
 
     # Remove mastercontainer from default bridge network
-    if sudo -u www-data docker inspect nextcloud-aio-mastercontainer  --format "{{.NetworkSettings.Networks}}" | grep -q "bridge"; then
+    if sudo -E -u www-data docker inspect nextcloud-aio-mastercontainer  --format "{{.NetworkSettings.Networks}}" | grep -q "bridge"; then
-        sudo -u www-data docker network disconnect bridge nextcloud-aio-mastercontainer
+        sudo -E -u www-data docker network disconnect bridge nextcloud-aio-mastercontainer
     fi
 
     # Wait 60s so that the whole loop will not be executed again

Containers/mastercontainer/daily-backup.sh

@@ -20,11 +20,11 @@ fi
 if [ "$LOCK_FILE_PRESENT" = 0 ] || ! [ -f "/mnt/docker-aio-config/data/daily_backup_running" ]; then
     find "/mnt/docker-aio-config/session/" -mindepth 1 -delete
 fi
-sudo -u www-data touch "/mnt/docker-aio-config/data/daily_backup_running"
+sudo -E -u www-data touch "/mnt/docker-aio-config/data/daily_backup_running"
 
 # Check if apache is running/stopped, watchtower is stopped and backupcontainer is stopped
-APACHE_PORT="$(docker inspect nextcloud-aio-apache --format "{{.Config.Env}}" | grep -o 'APACHE_PORT=[0-9]\+' | grep -o '[0-9]\+' | head -1)"
+LOCAL_APACHE_PORT="$(docker inspect nextcloud-aio-apache --format "{{.Config.Env}}" | grep -o 'APACHE_PORT=[0-9]\+' | grep -o '[0-9]\+' | head -1)"
-if [ -z "$APACHE_PORT" ]; then
+if [ -z "$LOCAL_APACHE_PORT" ]; then
     echo "APACHE_PORT is not set which is not expected..."
 else
     # Connect mastercontainer to nextcloud-aio network to make sure that nextcloud-aio-apache is reachable
@@ -32,7 +32,7 @@ else
     docker network connect nextcloud-aio nextcloud-aio-mastercontainer &>/dev/null
 
     # Wait for apache to start
-    while docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-apache$" && ! nc -z nextcloud-aio-apache "$APACHE_PORT"; do
+    while docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-apache$" && ! nc -z nextcloud-aio-apache "$LOCAL_APACHE_PORT"; do
         echo "Waiting for apache to become available"
         sleep 30
     done
@@ -50,7 +50,7 @@ done
 if [ "$AUTOMATIC_UPDATES" = 1 ]; then
     echo "Starting mastercontainer update..." 
     echo "(The script might get exited due to that. In order to update all the other containers correctly, you need to run this script with the same settings a second time.)"
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/UpdateMastercontainer.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/UpdateMastercontainer.php
 fi
 
 # Wait for watchtower to stop
@@ -64,17 +64,23 @@ if [ "$AUTOMATIC_UPDATES" = 1 ]; then
     done
 fi
 
+# Update container images to reduce downtime later on
+if [ "$AUTOMATIC_UPDATES" = 1 ]; then
+    echo "Updating container images..."
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/PullContainerImages.php
+fi
+
 # Stop containers if required
 # shellcheck disable=SC2235
 if [ "$CHECK_BACKUP" != 1 ] && ([ "$DAILY_BACKUP" != 1 ] || [ "$STOP_CONTAINERS" = 1 ]); then
     echo "Stopping containers..."
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/StopContainers.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/StopContainers.php
 fi
 
 # Execute the backup itself and some related tasks (also stops the containers)
 if [ "$DAILY_BACKUP" = 1 ]; then
     echo "Creating daily backup..."
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/CreateBackup.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/CreateBackup.php
     if ! docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-borgbackup$"; then
         echo "Something seems to be wrong: the borg container should be started at this step."
     fi
@@ -87,17 +93,17 @@ fi
 # Execute backup check
 if [ "$CHECK_BACKUP" = 1 ]; then
     echo "Starting backup check..."
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/CheckBackup.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/CheckBackup.php
 fi
 
 # Start and/or update containers
 if [ "$AUTOMATIC_UPDATES" = 1 ]; then
     echo "Starting and updating containers..."
-    sudo -u www-data php /var/www/docker-aio/php/src/Cron/StartAndUpdateContainers.php
+    sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/StartAndUpdateContainers.php
 else
     if [ "$START_CONTAINERS" = 1 ]; then
         echo "Starting containers without updating them..."
-        sudo -u www-data php /var/www/docker-aio/php/src/Cron/StartContainers.php
+        sudo -E -u www-data php /var/www/docker-aio/php/src/Cron/StartContainers.php
     fi
 fi
 

Containers/mastercontainer/mastercontainer.conf

@@ -1,5 +1,5 @@
-Listen 8000
+Listen 127.0.0.1:8000
-Listen 8080
+Listen 8080 https
 
 # Deny access to .ht files
 <Files ".ht*">
@@ -7,8 +7,8 @@ Listen 8080
 </Files>
 
 # Http host
-<VirtualHost *:8000>
+<VirtualHost 127.0.0.1:8000>
-    ServerName localhost
+    ServerName 127.0.0.1
 
     # Add error log
     CustomLog /proc/self/fd/1 proxy

Containers/mastercontainer/start.sh

@@ -33,17 +33,25 @@ if [ "$*" != "" ]; then
 fi
 
 # Check if socket is available and readable
-if ! [ -a "/var/run/docker.sock" ]; then
+if ! [ -e "/var/run/docker.sock" ]; then
     print_red "Docker socket is not available. Cannot continue."
     echo "Please make sure to mount the docker socket into /var/run/docker.sock inside the container!"
     echo "If you did this by purpose because you don't want the container to have access to the docker socket, see https://github.com/nextcloud/all-in-one/tree/main/manual-install."
+    echo "And https://github.com/nextcloud/all-in-one/blob/main/manual-install/latest.yml"
     exit 1
 elif ! mountpoint -q "/mnt/docker-aio-config"; then
     print_red "/mnt/docker-aio-config is not a mountpoint. Cannot proceed!"
     echo "Please make sure to mount the nextcloud_aio_mastercontainer docker volume into /mnt/docker-aio-config inside the container!"
     echo "If you are on TrueNas SCALE, see https://github.com/nextcloud/all-in-one#can-i-run-aio-on-truenas-scale"
     exit 1
-elif ! sudo -u www-data test -r /var/run/docker.sock; then
+elif mountpoint -q /var/www/docker-aio/php/containers.json; then
+    print_red "/var/www/docker-aio/php/containers.json is a mountpoint. Cannot proceed!"
+    echo "This is a not-supported customization of the mastercontainer!"
+    echo "Please remove this bind-mount from the mastercontainer."
+    echo "If you need to customize things, feel free to use https://github.com/nextcloud/all-in-one/tree/main/manual-install"
+    echo "See https://github.com/nextcloud/all-in-one/blob/main/manual-install/latest.yml"
+    exit 1
+elif ! sudo -E -u www-data test -r /var/run/docker.sock; then
     echo "Trying to fix docker.sock permissions internally..."
     DOCKER_GROUP=$(stat -c '%G' /var/run/docker.sock)
     DOCKER_GROUP_ID=$(stat -c '%g' /var/run/docker.sock)
@@ -61,28 +69,68 @@ elif ! sudo -u www-data test -r /var/run/docker.sock; then
         groupadd -g "$DOCKER_GROUP_ID" docker
         usermod -aG docker www-data
     fi
-    if ! sudo -u www-data test -r /var/run/docker.sock; then
+    if ! sudo -E -u www-data test -r /var/run/docker.sock; then
         print_red "Docker socket is not readable by the www-data user. Cannot continue."
         exit 1
     fi
 fi
 
-# Check if api version is supported
+# Get default docker api version
-if ! sudo -u www-data docker info &>/dev/null; then
-    print_red "Cannot connect to the docker socket. Cannot proceed."
-    echo "Did you maybe remove group read permissions for the docker socket? AIO needs them in order to access the docker socket."
-    echo "If SELinux is enabled on your host, see https://github.com/nextcloud/all-in-one#are-there-known-problems-when-selinux-is-enabled"
-    echo "If you are on TrueNas SCALE, see https://github.com/nextcloud/all-in-one#can-i-run-aio-on-truenas-scale"
-    exit 1
-fi
 API_VERSION_FILE="$(find ./ -name DockerActionManager.php | head -1)"
 API_VERSION="$(grep -oP 'const string API_VERSION.*\;' "$API_VERSION_FILE" | grep -oP '[0-9]+.[0-9]+' | head -1)"
+if [ -z "$API_VERSION" ]; then
+    print_red "Could not get API_VERSION. Something is wrong!"
+    exit 1
+fi
+
+# Check if DOCKER_API_VERSION is set globally
+if [ -n "$DOCKER_API_VERSION" ]; then
+    if ! echo "$DOCKER_API_VERSION" | grep -q '^[0-9].[0-9]\+$'; then
+        print_red "You've set DOCKER_API_VERSION but not to an allowed value.
+The string must be a version number like e.g. '1.44'.
+It is set to '$DOCKER_API_VERSION'."
+        exit 1
+    fi
+    print_red "DOCKER_API_VERSION was found to be set to '$DOCKER_API_VERSION'."
+    print_red "Please note that only v$API_VERSION is officially supported and tested by the maintainers of Nextcloud AIO."
+    print_red "So you run on your own risk and things might break without warning."
+else
+    # Export docker api version to use it everywhere
+    export DOCKER_API_VERSION="$API_VERSION"
+fi
+
+# Set a fallback docker api version. Needed for api version check. 
+# The check will not work otherwise on old docker versions
+FALLBACK_DOCKER_API_VERSION="1.41"
+
+# Check if docker info can be used
+if ! sudo -E -u www-data docker info &>/dev/null; then
+    if ! sudo -E -u www-data DOCKER_API_VERSION="$FALLBACK_DOCKER_API_VERSION" docker info &>/dev/null; then
+        print_red "Cannot connect to the docker socket. Cannot proceed."
+        echo "Did you maybe remove group read permissions for the docker socket? AIO needs them in order to access the docker socket."
+        echo "If SELinux is enabled on your host, see https://github.com/nextcloud/all-in-one#are-there-known-problems-when-selinux-is-enabled"
+        echo "If you are on TrueNas SCALE, see https://github.com/nextcloud/all-in-one#can-i-run-aio-on-truenas-scale"
+        echo "On macOS, see https://github.com/nextcloud/all-in-one#how-to-run-aio-on-macos"
+        echo "Another possibility might be that Docker api v$API_VERSION is not supported by your docker daemon."
+        echo "In that case, you should report this to https://github.com/nextcloud/all-in-one/issues"
+        echo ""
+        exit 1
+    fi
+fi
+
+# Docker api version check
 # shellcheck disable=SC2001
-API_VERSION_NUMB="$(echo "$API_VERSION" | sed 's/\.//')"
+API_VERSION_NUMB="$(echo "$DOCKER_API_VERSION" | sed 's/\.//')"
-LOCAL_API_VERSION_NUMB="$(sudo -u www-data docker version | grep -i "api version" | grep -oP '[0-9]+.[0-9]+' | head -1 | sed 's/\.//')"
+LOCAL_API_VERSION_NUMB="$(sudo -E -u www-data docker version | grep -i "api version" | grep -oP '[0-9]+.[0-9]+' | head -1 | sed 's/\.//')"
+if [ -z "$LOCAL_API_VERSION_NUMB" ]; then
+    LOCAL_API_VERSION_NUMB="$(sudo -E -u www-data DOCKER_API_VERSION="$FALLBACK_DOCKER_API_VERSION" docker version | grep -i "api version" | grep -oP '[0-9]+.[0-9]+' | head -1 | sed 's/\.//')"
+fi
 if [ -n "$LOCAL_API_VERSION_NUMB" ] && [ -n "$API_VERSION_NUMB" ]; then
     if ! [ "$LOCAL_API_VERSION_NUMB" -ge "$API_VERSION_NUMB" ]; then
-        print_red "Docker API v$API_VERSION is not supported by your docker engine. Cannot proceed. Please upgrade your docker engine if you want to run Nextcloud AIO!"
+        print_red "Docker API v$DOCKER_API_VERSION is not supported by your docker engine. Cannot proceed. Please upgrade your docker engine if you want to run Nextcloud AIO!"
+        echo "Alternatively, set the DOCKER_API_VERSION environmental variable to a compatible version."
+        echo "However please note that only v$API_VERSION is officially supported and tested by the maintainers of Nextcloud AIO."
+        echo "See https://github.com/nextcloud/all-in-one#how-to-adjust-the-internally-used-docker-api-version"
         exit 1
     fi
 else
@@ -91,7 +139,7 @@ else
 fi
 
 # Check Storage drivers
-STORAGE_DRIVER="$(sudo -u www-data docker info | grep "Storage Driver")"
+STORAGE_DRIVER="$(sudo -E -u www-data docker info | grep "Storage Driver")"
 # Check if vfs is used: https://github.com/nextcloud/all-in-one/discussions/1467
 if echo "$STORAGE_DRIVER" | grep -q vfs; then
     echo "$STORAGE_DRIVER"
@@ -102,23 +150,23 @@ elif echo "$STORAGE_DRIVER" | grep -q fuse-overlayfs; then
 fi
 
 # Check if snap install
-if sudo -u www-data docker info | grep "Docker Root Dir" | grep "/var/snap/docker/"; then
+if sudo -E -u www-data docker info | grep "Docker Root Dir" | grep "/var/snap/docker/"; then
     print_red "Warning: It looks like your installation uses docker installed via snap."
     print_red "This comes with some limitations and is disrecommended by the docker maintainers."
     print_red "See for example https://github.com/nextcloud/all-in-one/discussions/4890#discussioncomment-10386752"
 fi
 
 # Check if startup command was executed correctly
-if ! sudo -u www-data docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-mastercontainer$"; then
+if ! sudo -E -u www-data docker ps --format "{{.Names}}" | grep -q "^nextcloud-aio-mastercontainer$"; then
     print_red "It seems like you did not give the mastercontainer the correct name? (The 'nextcloud-aio-mastercontainer' container was not found.)
 Using a different name is not supported since mastercontainer updates will not work in that case!
 If you are on docker swarm and try to run AIO, see https://github.com/nextcloud/all-in-one#can-i-run-this-with-docker-swarm"
     exit 1
-elif ! sudo -u www-data docker volume ls --format "{{.Name}}" | grep -q "^nextcloud_aio_mastercontainer$"; then
+elif ! sudo -E -u www-data docker volume ls --format "{{.Name}}" | grep -q "^nextcloud_aio_mastercontainer$"; then
     print_red "It seems like you did not give the mastercontainer volume the correct name? (The 'nextcloud_aio_mastercontainer' volume was not found.)
 Using a different name is not supported since the built-in backup solution will not work in that case!"
     exit 1
-elif ! sudo -u www-data docker inspect nextcloud-aio-mastercontainer | grep -q "nextcloud_aio_mastercontainer"; then
+elif ! sudo -E -u www-data docker inspect nextcloud-aio-mastercontainer | grep -q "nextcloud_aio_mastercontainer"; then
     print_red "It seems like you did not attach the 'nextcloud_aio_mastercontainer' volume to the mastercontainer?
 This is not supported since the built-in backup solution will not work in that case!"
     exit 1
@@ -269,6 +317,7 @@ if ! curl --no-progress-meter https://ghcr.io/v2/ >/dev/null; then
     echo "Most likely is something blocking access to it."
     echo "You should be able to fix this by following https://dockerlabs.collabnix.com/intermediate/networking/Configuring_DNS.html"
     echo "Another solution is using https://github.com/nextcloud/all-in-one/tree/main/manual-install"
+    echo "See https://github.com/nextcloud/all-in-one/blob/main/manual-install/latest.yml"
     exit 1
 fi
 
@@ -279,6 +328,13 @@ if [ -n "$TZ" ]; then
     # Disable exit since it seems to be by default set on unraid and we dont want to break these instances
     # exit 1
 fi
+# Check that http proxy or no_proxy variable is not set which AIO does not support
+if [ -n "$HTTP_PROXY" ] || [ -n "$http_proxy" ] || [ -n "$HTTPS_PROXY" ] || [ -n "$https_proxy" ] || [ -n "$NO_PROXY" ] || [ -n "$no_proxy" ]; then
+    print_red "The environmental variable HTTP_PROXY, http_proxy, HTTPS_PROXY, https_proxy, NO_PROXY or no_proxy has been set which is not supported by AIO."
+    echo "If you need this, then you should use https://github.com/nextcloud/all-in-one/tree/main/manual-install"
+    echo "See https://github.com/nextcloud/all-in-one/blob/main/manual-install/latest.yml"
+    exit 1
+fi
 if mountpoint -q /etc/localtime; then
     print_red "/etc/localtime has been mounted into the container which is not allowed because AIO only supports running in the default Etc/UTC timezone!"
     echo "The correct timezone can be set in the AIO interface later on!"
@@ -359,6 +415,11 @@ export TZ=Etc/UTC
 # Fix apache startup
 rm -f /var/run/apache2/httpd.pid
 
+# Fix caddy startup
+if [ -d "/mnt/docker-aio-config/caddy/locks" ]; then
+    rm -rf /mnt/docker-aio-config/caddy/locks/*
+fi
+
 # Fix the Caddyfile format
 caddy fmt --overwrite /Caddyfile
 

Containers/nextcloud/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM php:8.3.22-fpm-alpine3.21
+FROM php:8.3.30-fpm-alpine3.23
 
 ENV PHP_MEMORY_LIMIT=512M
 ENV PHP_UPLOAD_LIMIT=16G
@@ -8,16 +8,20 @@ ENV SOURCE_LOCATION=/usr/src/nextcloud
 ENV REDIS_DB_INDEX=0
 
 # AIO settings start # Do not remove or change this line!
-ENV NEXTCLOUD_VERSION=31.0.6
+ENV NEXTCLOUD_VERSION=32.0.5
 ENV AIO_TOKEN=123456
 ENV AIO_URL=localhost
 # AIO settings end # Do not remove or change this line!
 
-COPY --chmod=775 *.sh /
+COPY --chmod=775 Containers/nextcloud/*.sh /
-COPY --chmod=774 upgrade.exclude /upgrade.exclude
+COPY --chmod=774 Containers/nextcloud/upgrade.exclude /upgrade.exclude
-COPY config/*.php /
+COPY Containers/nextcloud/config/*.php /
-COPY supervisord.conf /supervisord.conf
+COPY Containers/nextcloud/supervisord.conf /supervisord.conf
-COPY root.motd /root.motd
+
+# AIO cloning start # Do not remove or change this line!
+COPY app /usr/src/nextcloud/apps/nextcloud-aio
+COPY Containers/nextcloud/root.motd /root.motd
+# AIO cloning end # Do not remove or change this line!
 
 VOLUME /mnt/ncdata
 VOLUME /var/www/html
@@ -79,16 +83,17 @@ RUN set -ex; \
     \
 # pecl will claim success even if one install fails, so we need to perform each install separately
     pecl install -o igbinary-3.2.16; \
-    pecl install APCu-5.1.24; \
+    pecl install APCu-5.1.28; \
-    pecl install -D 'enable-memcached-igbinary="yes"' memcached-3.3.0; \
+    pecl install -D 'enable-memcached-igbinary="yes"' memcached-3.4.0; \
-    pecl install -oD 'enable-redis-igbinary="yes" enable-redis-zstd="yes" enable-redis-lz4="yes"' redis-6.2.0; \
+    pecl install -oD 'enable-redis-igbinary="yes" enable-redis-zstd="yes" enable-redis-lz4="yes"' redis-6.3.0; \
-   pecl install -o imagick-3.8.0; \
+   pecl install -o imagick-3.8.1; \
     \
     docker-php-ext-enable \
         igbinary \
         apcu \
         memcached \
         redis \
+        imagick \
     ; \
     rm -r /tmp/pear; \
     \
@@ -107,7 +112,7 @@ RUN set -ex; \
     } >> /usr/local/etc/php/conf.d/docker-php-ext-igbinary.ini; \
     \
 # set recommended PHP.ini settings
-# see https://docs.nextcloud.com/server/stable/admin_manual/configuration_server/server_tuning.html#enable-php-opcache
+# see https://docs.nextcloud.com/server/stable/admin_manual/installation/server_tuning.html#enable-php-opcache and below
     { \
         echo 'opcache.max_accelerated_files=10000'; \
         echo 'opcache.memory_consumption=256'; \
@@ -128,13 +133,13 @@ RUN set -ex; \
         echo 'upload_max_filesize=${PHP_UPLOAD_LIMIT}'; \
         echo 'post_max_size=${PHP_UPLOAD_LIMIT}'; \
         echo 'max_execution_time=${PHP_MAX_TIME}'; \
-        echo 'max_input_time=${PHP_MAX_TIME}'; \
+        echo 'max_input_time=-1'; \
         echo 'default_socket_timeout=${PHP_MAX_TIME}'; \
     } > /usr/local/etc/php/conf.d/nextcloud.ini; \
     \
     { \
         echo 'session.save_handler = redis'; \
-        echo 'session.save_path = "tcp://${REDIS_HOST}:6379?database=${REDIS_DB_INDEX}${REDIS_USER_AUTH}&auth[]=${REDIS_HOST_PASSWORD}"'; \
+        echo 'session.save_path = "tcp://${REDIS_HOST}:${REDIS_PORT}?database=${REDIS_DB_INDEX}${REDIS_USER_AUTH}&auth[]=${REDIS_HOST_PASSWORD}"'; \
         echo 'redis.session.locking_enabled = 1'; \
         echo 'redis.session.lock_retries = -1'; \
         echo 'redis.session.lock_wait_time = 10000'; \
@@ -152,7 +157,7 @@ RUN set -ex; \
     ; \
     \
     curl -fsSL -o nextcloud.tar.bz2 \
-        "https://download.nextcloud.com/server/releases/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2"; \
+        "https://github.com/nextcloud-releases/server/releases/download/v${NEXTCLOUD_VERSION}/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2"; \
     curl -fsSL -o nextcloud.tar.bz2.asc \
         "https://download.nextcloud.com/server/releases/nextcloud-${NEXTCLOUD_VERSION}.tar.bz2.asc"; \
     export GNUPGHOME="$(mktemp -d)"; \
@@ -226,7 +231,6 @@ RUN set -ex; \
         sudo \
         grep \
         nodejs \
-        libreoffice \
         bind-tools \
         imagemagick \
         imagemagick-svg \
@@ -242,20 +246,13 @@ RUN set -ex; \
     sed -i 's/^pm.max_children =.*/pm.max_children = 5000/' /usr/local/etc/php-fpm.d/www.conf; \
     sed -i 's|access.log = /proc/self/fd/2|access.log = /proc/self/fd/1|' /usr/local/etc/php-fpm.d/docker.conf; \
     \
-# AIO cloning start # Do not remove or change this line!
+    echo "[ -n \"\$TERM\" ] && [ -f /root.motd ] && cat /root.motd" >> /root/.bashrc; \
-    rm -rf /tmp/nextcloud-aio && \
-    mkdir -p /tmp/nextcloud-aio && \
-    cd /tmp/nextcloud-aio && \
-    git clone https://github.com/nextcloud-releases/all-in-one.git --depth 1 .; \
-    mkdir -p /usr/src/nextcloud/apps/nextcloud-aio; \
-    cp -r ./app/* /usr/src/nextcloud/apps/nextcloud-aio/; \
-    echo "[ -n \"\$TERM\" ] && cat /root.motd" >> /root/.bashrc; \
-# AIO cloning end # Do not remove or change this line!
     \
     chown www-data:root -R /usr/src && \
     chmod 777 -R /usr/local/etc/php/conf.d && \
     chmod 777 -R /usr/local/etc/php-fpm.d && \
     chmod -R 777 /tmp; \
+    chmod -R 777 /etc/openldap; \
     \
     mkdir -p /nc-updater; \
     chmod -R 777 /nc-updater
@@ -267,4 +264,5 @@ CMD ["/usr/bin/supervisord", "-c", "/supervisord.conf"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/nextcloud/README.md

@@ -0,0 +1,35 @@
+# Nextcloud All-in-One ``nextcloud`` Container
+
+This folder contains the OCI/Docker container definition, along with associated resources and configuration files, for building the `nextcloud` container as part of the [Nextcloud All-in-One](https://github.com/nextcloud/all-in-one) project. This container hosts PHP and the Nextcloud Server application.
+
+## Overview
+
+The Nextcloud container provides the core Nextcloud application environment, including the necessary dependencies and configuration for seamless integration into the All-in-One stack. The container hosts:
+
+- The PHP SAPI/backend (php-fpm)
+- Nextcloud background jobs and scheduled tasks, which are handled via cron
+- Miscellaneous minor support services specific to AIO's Nextcloud deployment (health and exec)
+
+## Contents
+
+- **Dockerfile**: Instructions for building the Nextcloud container image.
+- **Entrypoint script**: The `start.sh` script is used for container initialization and runtime configuration before starting supervisord.
+- **Nextcloud configuration files**: Specific to running in a containerized setting and/or within AIO.
+- **Supervisor**: The `supervisord.conf` file defines the long-running services hosted within the container (php-fpm, cron, etc.).
+
+## Usage
+
+This container is intended to be used as part of the All-in-One deployment and is not meant to be used on its own. Among other requirements, it needs a web server container (which AIO provides in a dedicated Apache container). It is designed to be orchestrated by the [All-in-One mastercontainer](https://github.com/nextcloud/all-in-one/tree/main/Containers/mastercontainer) or used within an [AIO Manual Installation](https://github.com/nextcloud/all-in-one/tree/main/manual-install) or [AIO Helm chart](https://github.com/nextcloud/all-in-one/tree/main/nextcloud-aio-helm-chart).
+
+## Documentation
+
+- [Nextcloud All-in-One Documentation](https://github.com/nextcloud/all-in-one#readme)
+- [Nextcloud Documentation](https://docs.nextcloud.com/)
+
+## Contributing
+
+Contributions are welcome! Please follow the Nextcloud project's guidelines and submit pull requests or issues via the main repository.
+
+## License
+
+This folder and its contents are licensed under the [GNU AGPLv3](https://www.gnu.org/licenses/agpl-3.0.html), in line with the rest of Nextcloud All-in-One.

Containers/nextcloud/config/apps.config.php

@@ -16,3 +16,6 @@ $CONFIG = array (
 if (getenv('APPS_ALLOWLIST')) {
     $CONFIG['appsallowlist'] = explode(" ", getenv('APPS_ALLOWLIST'));
 }
+if (getenv('NEXTCLOUD_APP_STORE_URL')) {
+    $CONFIG['appstoreurl'] = getenv('NEXTCLOUD_APP_STORE_URL');
+}

Containers/nextcloud/config/certificates-bundle.config.php

@@ -0,0 +1,5 @@
+<?php
+// Check if NEXTCLOUD_TRUSTED_CERTIFICATES_ are configured
+if (str_contains(implode(' ', array_keys(getenv())), 'NEXTCLOUD_TRUSTED_CERTIFICATES_')) {
+  $CONFIG['default_certificates_bundle_path'] = '/var/www/html/data/certificates/ca-bundle.crt';
+}

Containers/nextcloud/config/postgres.config.php

@@ -0,0 +1,17 @@
+<?php
+if (getenv('NEXTCLOUD_TRUSTED_CERTIFICATES_POSTGRES')) {
+  $CONFIG = array(
+    'pgsql_ssl' => array(
+      'mode' => 'verify-ca',
+      'rootcert' => '/var/www/html/data/certificates/ca-bundle.crt',
+    ),
+  );
+}
+if (getenv('NEXTCLOUD_TRUSTED_CERTIFICATES_MYSQL')) {
+  $CONFIG = array(
+    'dbdriveroptions' => array(
+      PDO::MYSQL_ATTR_SSL_CA => '/var/www/html/data/certificates/ca-bundle.crt',
+    ),
+  );
+}
+

Containers/nextcloud/config/redis.config.php

@@ -9,10 +9,8 @@ if (getenv('REDIS_HOST')) {
     ),
   );
 
-  if (getenv('REDIS_HOST_PORT')) {
+  if (getenv('REDIS_PORT')) {
-    $CONFIG['redis']['port'] = (int) getenv('REDIS_HOST_PORT');
+    $CONFIG['redis']['port'] = (int) getenv('REDIS_PORT');
-  } elseif (getenv('REDIS_HOST')[0] != '/') {
-    $CONFIG['redis']['port'] = 6379;
   }
 
   if (getenv('REDIS_DB_INDEX')) {

Containers/nextcloud/config/s3.config.php

@@ -4,10 +4,13 @@ if (getenv('OBJECTSTORE_S3_BUCKET')) {
   $use_path = getenv('OBJECTSTORE_S3_USEPATH_STYLE');
   $use_legacyauth = getenv('OBJECTSTORE_S3_LEGACYAUTH');
   $autocreate = getenv('OBJECTSTORE_S3_AUTOCREATE');
+  $multibucket = getenv('OBJECTSTORE_S3_MULTIBUCKET');
   $CONFIG = array(
     'objectstore' => array(
       'class' => '\OC\Files\ObjectStore\S3',
       'arguments' => array(
+        'multibucket' => $multibucket === 'true',
+        'num_buckets' => (int)getenv('OBJECTSTORE_S3_NUM_BUCKETS') ?: 64,
         'bucket' => getenv('OBJECTSTORE_S3_BUCKET'),
         'key' => getenv('OBJECTSTORE_S3_KEY') ?: '',
         'secret' => getenv('OBJECTSTORE_S3_SECRET') ?: '',
@@ -16,12 +19,13 @@ if (getenv('OBJECTSTORE_S3_BUCKET')) {
         'port' => getenv('OBJECTSTORE_S3_PORT') ?: '',
         'storageClass' => getenv('OBJECTSTORE_S3_STORAGE_CLASS') ?: '',
         'objectPrefix' => getenv("OBJECTSTORE_S3_OBJECT_PREFIX") ? getenv("OBJECTSTORE_S3_OBJECT_PREFIX") : "urn:oid:",
-        'autocreate' => (strtolower($autocreate) === 'false' || $autocreate == false) ? false : true,
+        'autocreate' => strtolower($autocreate) !== 'false',
-        'use_ssl' => (strtolower($use_ssl) === 'false' || $use_ssl == false) ? false : true,
+        'use_ssl' => strtolower($use_ssl) !== 'false',
         // required for some non Amazon S3 implementations
-        'use_path_style' => $use_path == true && strtolower($use_path) !== 'false',
+        'use_path_style' => strtolower($use_path) === 'true',
         // required for older protocol versions
-        'legacy_auth' => $use_legacyauth == true && strtolower($use_legacyauth) !== 'false'
+        'legacy_auth' => strtolower($use_legacyauth) === 'true',
+        'use_nextcloud_bundle' => 1,
       )
     )
   );

Containers/nextcloud/config/smtp.config.php

@@ -18,3 +18,14 @@ if (getenv('SMTP_HOST') && getenv('MAIL_FROM_ADDRESS') && getenv('MAIL_DOMAIN'))
       $CONFIG['mail_smtppassword'] = '';
   }
 }
+
+if (getenv('NEXTCLOUD_TRUSTED_CERTIFICATES_MAILER')) {
+  $CONFIG = array(
+    'mail_smtpstreamoptions' => array(
+      'ssl' => array(
+        'verify_peer_name' => false,
+        'cafile' => '/var/www/html/data/certificates/ca-bundle.crt',
+      )
+    )
+  );
+}

Containers/nextcloud/entrypoint.sh

@@ -20,36 +20,97 @@ run_upgrade_if_needed_due_to_app_update() {
     fi
 }
 
+# Create cert bundle
+if env | grep -q NEXTCLOUD_TRUSTED_CERTIFICATES_; then
+
+    # Enable debug mode
+    set -x
+
+    # Default vars
+    CERTIFICATES_ROOT_DIR="/var/www/html/data/certificates"
+    CERTIFICATE_BUNDLE="/var/www/html/data/certificates/ca-bundle.crt"
+    
+    # Remove old root certs and recreate them with current ones
+    rm -rf "$CERTIFICATES_ROOT_DIR"
+    mkdir -p "$CERTIFICATES_ROOT_DIR"
+
+    # Retrieve default root cert bundle
+    if ! [ -f "$SOURCE_LOCATION/resources/config/ca-bundle.crt" ]; then
+        echo "Root ca-bundle not found. Only concattening configured NEXTCLOUD_TRUSTED_CERTIFICATES files!"
+        # Recreate cert file
+        touch "$CERTIFICATE_BUNDLE"
+    else
+        # Write default bundle to the target ca file
+        cat "$SOURCE_LOCATION/resources/config/ca-bundle.crt" > "$CERTIFICATE_BUNDLE"
+    fi
+
+    # Iterate through certs
+    TRUSTED_CERTIFICATES="$(env | grep NEXTCLOUD_TRUSTED_CERTIFICATES_ | grep -oP '^[A-Z_a-z0-9]+')"
+    mapfile -t TRUSTED_CERTIFICATES <<< "$TRUSTED_CERTIFICATES"
+    for certificate in "${TRUSTED_CERTIFICATES[@]}"; do
+
+        # Create new line
+        echo "" >> "$CERTIFICATE_BUNDLE"
+
+        # Check if variable is an actual cert
+        if echo "${!certificate}" | grep -q "BEGIN CERTIFICATE" && echo "${!certificate}" | grep -q "END CERTIFICATE"; then
+            # Write out cert to bundle
+            echo "${!certificate}" >> "$CERTIFICATE_BUNDLE"
+        fi
+
+        # Create file in cert dir for extra logic in other places
+        if ! [ -f "$CERTIFICATES_ROOT_DIR/$CERTIFICATE_NAME" ]; then
+            touch "$CERTIFICATES_ROOT_DIR/$CERTIFICATE_NAME"
+        fi
+
+    done
+
+    # Backwards compatibility with older instances
+    if [ -f "/var/www/html/config/postgres.config.php" ]; then
+        sed -i "s|/var/www/html/data/certificates/POSTGRES|/var/www/html/data/certificates/ca-bundle.crt|" /var/www/html/config/postgres.config.php
+        sed -i "s|/var/www/html/data/certificates/MYSQL|/var/www/html/data/certificates/ca-bundle.crt|" /var/www/html/config/postgres.config.php
+    fi
+
+    # Print out bundle one last time
+    cat "$CERTIFICATE_BUNDLE"
+
+    # Disable debug mode
+    set +x
+fi
+
 # Adjust DATABASE_TYPE to by Nextcloud supported value
 if [ "$DATABASE_TYPE" = postgres ]; then
     export DATABASE_TYPE=pgsql
 fi
 
-# Only start container if redis is accessible
+# Only start container if Redis is accessible
 # shellcheck disable=SC2153
-while ! nc -z "$REDIS_HOST" "6379"; do
+while ! nc -z "$REDIS_HOST" "$REDIS_PORT"; do
-    echo "Waiting for redis to start..."
+    echo "Waiting for Redis to start..."
     sleep 5
 done
 
 # Check permissions in ncdata
-touch "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
+test_file="$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
-if ! [ -f "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" ]; then
+touch "$test_file"
-    echo "The www-data user doesn't seem to have access rights in the datadir.
+if ! [ -f "$test_file" ]; then
-Most likely are the files located on a drive that does not follow linux permissions.
+    echo "The www-data user does not appear to have access rights to the data directory."
-Please adjust the permissions like mentioned below.
+    echo "It is possible that the files are on a filesystem that does not support standard Linux permissions,"
-The found permissions are:
+    echo "or the permissions simply need to be adjusted. Please change the permissions as described below."
-$(stat -c "%u:%g %a" "$NEXTCLOUD_DATA_DIR")
+    echo "Current permissions are:"
-(userID:groupID permissions)
+    stat -c "%u:%g %a" "$NEXTCLOUD_DATA_DIR"
-but they should be:
+    echo "(userID:groupID permissions)"
-33:0 750
+    echo "They should be:"
-(userID:groupID permissions)
+    echo "33:0 750"
-Also make sure that the parent directories on the host of the directory that you've chosen as datadir are publicly readable with e.g. 'sudo chmod +r /mnt' (adjust the command accordingly to your case) and the same for all subdirectories.
+    echo "(userID:groupID permissions)"
-Additionally, if you want to use a Fuse-mount as datadir, set 'allow_other' as additional mount option.
+    echo "Also, ensure that all parent directories on the host of your chosen data directory are publicly readable."
-For SMB/CIFS mounts as datadir, see https://github.com/nextcloud/all-in-one#can-i-use-a-cifssmb-share-as-nextclouds-datadir"
+    echo "For example: sudo chmod +r /mnt  (adjust this command as needed)."
+    echo "If you want to use a FUSE mount as the data directory, add 'allow_other' as an additional mount option."
+    echo "For SMB/CIFS mounts as the data directory, see:"
+    echo "  https://github.com/nextcloud/all-in-one#can-i-use-a-cifssmb-share-as-nextclouds-datadir"
     exit 1
 fi
-rm "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
+rm -f "$test_file"
 
 if [ -f /var/www/html/version.php ]; then
     # shellcheck disable=SC2016
@@ -71,26 +132,31 @@ fi
 
 # Don't start the container if Nextcloud is not compatible with the PHP version
 if [ -f "/var/www/html/lib/versioncheck.php" ] && ! php /var/www/html/lib/versioncheck.php; then
-    echo "It seems like your installed Nextcloud is not compatible with the by the container provided PHP version."
+    echo "Your installed Nextcloud version is not compatible with the PHP version provided by this image."
-    echo "This most likely happened because you tried to restore an old Nextcloud version from backup that is not compatible with the PHP version that comes with the container."
+    echo "This typically occurs when you restore an older Nextcloud backup that does not support the"
-    echo "Please try to restore a more recent backup which contains a Nextcloud version that is compatible with the PHP version that comes with the container."
+    echo "PHP version included in this image."
-    echo "If you do not have a more recent backup, feel free to have a look at this documentation: https://github.com/nextcloud/all-in-one/blob/main/manual-upgrade.md"
+    echo "Please restore a more recent backup that includes a compatible Nextcloud version."
+    echo "If you do not have a more recent backup, refer to the manual upgrade documentation:"
+    echo "  https://github.com/nextcloud/all-in-one/blob/main/manual-upgrade.md"
     exit 1
 fi
 
 # Do not start the container if the last update failed
 if [ -f "$NEXTCLOUD_DATA_DIR/update.failed" ]; then
     echo "The last Nextcloud update failed."
-    echo "Please restore from backup and try again!"
+    echo "Please restore from a backup and try again."
-    echo "If you do not have a backup in place, you can simply delete the update.failed file in the datadir which will allow the container to start again."
+    echo "If you do not have a backup, you can delete the update.failed file in the data directory"
+    echo "to allow the container to start again."
     exit 1
 fi
 
 # Do not start the container if the install failed
 if [ -f "$NEXTCLOUD_DATA_DIR/install.failed" ]; then
     echo "The initial Nextcloud installation failed."
-    echo "Please reset AIO properly and try again. For further clues what went wrong, check the logs above."
+    echo "For more information about what went wrong, check the logs above."
-    echo "See https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance"
+    echo "Please reset AIO properly and try again."
+    echo "See:"
+    echo "  https://github.com/nextcloud/all-in-one#how-to-properly-reset-the-instance"
     exit 1
 fi
 
@@ -143,7 +209,7 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
         if [ "$installed_version" != "0.0.0.0" ]; then
 # Check connection to appstore start # Do not remove or change this line!
             while true; do
-                echo -e "Checking connection to appstore"
+                echo -e "Checking connection to the app store..."
                 APPSTORE_URL="https://apps.nextcloud.com/api/v1"
                 if grep -q appstoreurl /var/www/html/config/config.php; then
                     set -x
@@ -154,10 +220,10 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                 CURL_STATUS="$(curl -LI "$APPSTORE_URL"/apps.json -o /dev/null -w '%{http_code}\n' -s)"
                 if [[ "$CURL_STATUS" = "200" ]]
                 then
-                    echo "Appstore is reachable"
+                    echo "App store is reachable."
                     break
                 else
-                    echo "Curl didn't produce a 200 status, is appstore reachable?"
+                    echo "Curl did not return a 200 status. Is the app store reachable?"
                     sleep 5
                 fi
             done
@@ -167,21 +233,21 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
 
             php /var/www/html/occ maintenance:mode --off
 
-            echo "Getting and backing up the status of apps for later, this might take a while..."
+            echo "Getting and backing up the status of apps for later; this might take a while..."
             NC_APPS="$(find /var/www/html/custom_apps/ -type d -maxdepth 1 -mindepth 1 | sed 's|/var/www/html/custom_apps/||g')"
             if [ -z "$NC_APPS" ]; then
-                echo "No apps detected, aborting export of app status..."
+                echo "No apps detected. Aborting export of app status..."
                 APPSTORAGE="no-export-done"
             else
                 mapfile -t NC_APPS_ARRAY <<< "$NC_APPS"
                 declare -Ag APPSTORAGE
-                echo "Disabling apps before the update in order to make the update procedure more safe. This can take a while..."
+                echo "Disabling apps before the update to make the update procedure safer. This can take a while..."
                 for app in "${NC_APPS_ARRAY[@]}"; do
                     if APPSTORAGE[$app]="$(php /var/www/html/occ config:app:get "$app" enabled)"; then
                         php /var/www/html/occ app:disable "$app"
                     else
                         APPSTORAGE[$app]=""
-                        echo "Not disabling $app because the occ command to get the enabled state was failing."
+                        echo "Not disabling $app because the occ command to get its enabled state failed."
                     fi
                 done
             fi
@@ -195,19 +261,61 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
             run_upgrade_if_needed_due_to_app_update
         fi
 
-        echo "Initializing nextcloud $image_version ..."
+        echo "Initializing Nextcloud $image_version ..."
-        rsync -rlD --delete --exclude-from=/upgrade.exclude "$SOURCE_LOCATION/" /var/www/html/
 
+        # Copy over initial data from Nextcloud archive
+        rsync -rlD --delete \
+            --exclude-from=/upgrade.exclude \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
+
+        # Copy custom_apps from Nextcloud archive
+        if ! directory_empty "$SOURCE_LOCATION/custom_apps"; then
+            set -x
+            for app in "$SOURCE_LOCATION/custom_apps"/*; do
+                app_id="$(basename "$app")"
+                mkdir -p "/var/www/html/custom_apps/$app_id"
+                rsync -rlD --delete \
+                    --include "/$app_id/" \
+                    --exclude '/*' \
+                    "$SOURCE_LOCATION/custom_apps/" \
+                    /var/www/html/custom_apps/
+            done
+            set +x
+        fi
+
+        # Copy these from Nextcloud archive if they don't exist yet (i.e. new install)
         for dir in config data custom_apps themes; do
             if [ ! -d "/var/www/html/$dir" ] || directory_empty "/var/www/html/$dir"; then
-                rsync -rlD --include "/$dir/" --exclude '/*' "$SOURCE_LOCATION/" /var/www/html/
+                rsync -rlD \
+                    --include "/$dir/" \
+                    --exclude '/*' \
+                    "$SOURCE_LOCATION/" \
+                    /var/www/html/
             fi
         done
-        rsync -rlD --delete --include '/config/' --exclude '/*' --exclude '/config/CAN_INSTALL' --exclude '/config/config.sample.php' --exclude '/config/config.php' "$SOURCE_LOCATION/" /var/www/html/
+
-        rsync -rlD --include '/version.php' --exclude '/*' "$SOURCE_LOCATION/" /var/www/html/
+        rsync -rlD --delete \
+            --include '/config/' \
+            --exclude '/*' \
+            --exclude '/config/CAN_INSTALL' \
+            --exclude '/config/config.sample.php' \
+            --exclude '/config/config.php' \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
+
+        rsync -rlD \
+            --include '/version.php' \
+            --exclude '/*' \
+            "$SOURCE_LOCATION/" \
+            /var/www/html/
+
         echo "Initializing finished"
 
-        #install
+        ################
+        # Fresh Install
+        ################
+        
         if [ "$installed_version" = "0.0.0.0" ]; then
             echo "New Nextcloud instance."
 
@@ -221,21 +329,31 @@ if ! [ -f "$NEXTCLOUD_DATA_DIR/skip.update" ]; then
                 INSTALL_OPTIONS+=(--data-dir "$NEXTCLOUD_DATA_DIR")
             fi
 
-            # We do our own permission check so the permission check is not needed
+        # Skip the default permission check (we do our own)
-            cat << DATADIR_PERMISSION_CONF > /var/www/html/config/datadir.permission.config.php
+        cat > /var/www/html/config/datadir.permission.config.php <<'EOF'
 <?php
-    \$CONFIG = array (
+    $CONFIG = array (
-    'check_data_directory_permissions' => false
+        'check_data_directory_permissions' => false
-);
+    );
-DATADIR_PERMISSION_CONF
+EOF
 
             echo "Installing with $DATABASE_TYPE database"
             # Set a default value for POSTGRES_PORT
             if [ -z "$POSTGRES_PORT" ]; then
-              POSTGRES_PORT=5432
+                POSTGRES_PORT=5432
             fi
-            INSTALL_OPTIONS+=(--database "$DATABASE_TYPE" --database-name "$POSTGRES_DB" --database-user "$POSTGRES_USER" --database-pass "$POSTGRES_PASSWORD" --database-host "$POSTGRES_HOST" --database-port "$POSTGRES_PORT")
 
+            # Add database options to INSTALL_OPTIONS
+            # shellcheck disable=SC2153
+            INSTALL_OPTIONS+=(
+                --database "$DATABASE_TYPE"
+                --database-name "$POSTGRES_DB"
+                --database-user "$POSTGRES_USER"
+                --database-pass "$POSTGRES_PASSWORD"
+                --database-host "$POSTGRES_HOST"
+                --database-port "$POSTGRES_PORT"
+            )
+            
             echo "Starting Nextcloud installation..."
             if ! php /var/www/html/occ maintenance:install "${INSTALL_OPTIONS[@]}"; then
                 echo "Installation of Nextcloud failed!"
@@ -257,7 +375,7 @@ DATADIR_PERMISSION_CONF
 
                 if [ "$try" -ge "$max_retries" ]; then
                     echo "Installation of Nextcloud failed!"
-                    echo "Install errors: $(cat /var/www/html/data/nextcloud.log)"
+                    echo "Installation errors: $(cat /var/www/html/data/nextcloud.log)"
                     touch "$NEXTCLOUD_DATA_DIR/install.failed"
                     exit 1
                 fi
@@ -293,10 +411,12 @@ DATADIR_PERMISSION_CONF
                 installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
                 INSTALLED_MAJOR="${installed_version%%.*}"
                 IMAGE_MAJOR="${image_version%%.*}"
+                # If a valid upgrade path, trigger the Nextcloud built-in Updater
                 if ! [ "$INSTALLED_MAJOR" -gt "$IMAGE_MAJOR" ]; then
                     php /var/www/html/updater/updater.phar --no-interaction --no-backup
                     if ! php /var/www/html/occ -V || php /var/www/html/occ status | grep maintenance | grep -q 'true'; then
                         echo "Installation of Nextcloud failed!"
+                        # TODO: Add a hint here about what to do / where to look / updater.log? 
                         touch "$NEXTCLOUD_DATA_DIR/install.failed"
                         exit 1
                     fi
@@ -355,7 +475,7 @@ DATADIR_PERMISSION_CONF
                 read -ra STARTUP_APPS_ARRAY <<< "$STARTUP_APPS"
                 for app in "${STARTUP_APPS_ARRAY[@]}"; do
                     if ! echo "$app" | grep -q '^-'; then 
-                        if [ -z "$(find /var/www/html/apps -type d -maxdepth 1 -mindepth 1 -name "$app" )" ]; then
+                        if [ -z "$(find /var/www/html/apps /var/www/html/custom_apps -type d -maxdepth 1 -mindepth 1 -name "$app" )" ]; then
                             # If not shipped, install and enable the app
                             php /var/www/html/occ app:install "$app"
                         else
@@ -373,11 +493,11 @@ DATADIR_PERMISSION_CONF
         #upgrade
         else
             touch "$NEXTCLOUD_DATA_DIR/update.failed"
-            echo "Upgrading nextcloud from $installed_version to $image_version..."
+            echo "Upgrading Nextcloud from $installed_version to $image_version..."
             php /var/www/html/occ config:system:delete integrity.check.disabled
             if ! php /var/www/html/occ upgrade || ! php /var/www/html/occ -V; then
                 echo "Upgrade failed. Please restore from backup."
-                bash /notify.sh "Nextcloud update to $image_version failed!" "Please restore from backup!"
+                bash /notify.sh "Nextcloud update to $image_version failed!" "Please restore from backup."
                 exit 1
             fi
 
@@ -385,7 +505,7 @@ DATADIR_PERMISSION_CONF
             installed_version="$(php -r 'require "/var/www/html/version.php"; echo implode(".", $OC_Version);')"
 
             rm "$NEXTCLOUD_DATA_DIR/update.failed"
-            bash /notify.sh "Nextcloud update to $image_version successful!" "Feel free to inspect the Nextcloud container logs for more info."
+            bash /notify.sh "Nextcloud update to $image_version successful!" "You may inspect the Nextcloud container logs for more information."
 
             php /var/www/html/occ app:update --all
 
@@ -393,7 +513,7 @@ DATADIR_PERMISSION_CONF
 
             # Restore app status
             if [ "${APPSTORAGE[0]}" != "no-export-done" ]; then
-                echo "Restoring the status of apps. This can take a while..."
+                echo "Restoring app statuses. This may take a while..."
                 for app in "${!APPSTORAGE[@]}"; do
                     if [ -n "${APPSTORAGE[$app]}" ]; then
                         if [ "${APPSTORAGE[$app]}" != "no" ]; then
@@ -405,13 +525,13 @@ DATADIR_PERMISSION_CONF
                                     php /var/www/html/occ maintenance:mode --off
                                 fi
                                 run_upgrade_if_needed_due_to_app_update
-                                echo "The $app app could not get enabled. Probably because it is not compatible with the new Nextcloud version."
+                                echo "The $app app could not be re-enabled, probably because it is not compatible with the new Nextcloud version."
                                 if [ "$app" = apporder ]; then
                                     CUSTOM_HINT="The apporder app was deprecated. A possible replacement is the side_menu app, aka 'Custom menu'."
                                 else
-                                    CUSTOM_HINT="Most likely because it is not compatible with the new Nextcloud version."
+                                    CUSTOM_HINT="Most likely, it is not compatible with the new Nextcloud version."
                                 fi
-                                bash /notify.sh "Could not enable the $app app after the Nextcloud update!" "$CUSTOM_HINT Feel free to look at the Nextcloud update logs and force-enable the app again from the app-store UI."
+                                bash /notify.sh "Could not re-enable the $app app after the Nextcloud update!" "$CUSTOM_HINT Feel free to review the Nextcloud update logs and force-enable the app again if you wish."
                                 continue
                             fi
                             # Only restore the group settings, if the app was enabled (and is thus compatible with the new NC version)
@@ -433,7 +553,7 @@ DATADIR_PERMISSION_CONF
             php /var/www/html/occ config:app:set updatenotification notify_groups --value="[]"
 
             # Apply optimization
-            echo "Doing some optimizations..."
+            echo "Performing some optimizations..."
             if [ "$NEXTCLOUD_SKIP_DATABASE_OPTIMIZATION" != yes ]; then
                 php /var/www/html/occ maintenance:repair --include-expensive
                 php /var/www/html/occ db:add-missing-indices
@@ -464,10 +584,10 @@ if [ -z "$OBJECTSTORE_S3_BUCKET" ] && [ -z "$OBJECTSTORE_SWIFT_URL" ]; then
     # Check if appdata is present
     # If not, something broke (e.g. changing ncdatadir after aio was first started)
     if [ -z "$(find "$NEXTCLOUD_DATA_DIR/" -maxdepth 1 -mindepth 1 -type d -name "appdata_*")" ]; then
-        echo "Appdata is not present. Did you maybe change the datadir after the initial Nextcloud installation? This is not supported!"
+        echo "Appdata is not present. Did you change the datadir after the initial Nextcloud installation? This is not supported!"
         echo "See https://github.com/nextcloud/all-in-one#how-to-change-the-default-location-of-nextclouds-datadir"
-        echo "If you adjusted the datadir to be located on an external drive, make sure that the drive is still mounted!"
+        echo "If you moved the datadir to an external drive, make sure that the drive is still mounted."
-        echo "In the datadir was found:"
+        echo "The following was found in the datadir:"
         ls -la "$NEXTCLOUD_DATA_DIR/"
         exit 1
     fi
@@ -641,7 +761,7 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
             fi
         fi
     else
-        echo "Warning: No ipv4-address found for $COLLABORA_HOST."
+        echo "Warning: No IPv4 address found for $COLLABORA_HOST."
     fi
     if [ -n "$COLLABORA_IPv6_ADDRESS" ]; then
         if ! echo "$COLLABORA_ALLOW_LIST" | grep -q "$COLLABORA_IPv6_ADDRESS"; then
@@ -652,10 +772,10 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
             fi
         fi
     else
-        echo "No ipv6-address found for $COLLABORA_HOST."
+        echo "No IPv6 address found for $COLLABORA_HOST."
     fi
     if [ -n "$COLLABORA_ALLOW_LIST" ]; then
-        PRIVATE_IP_RANGES='127.0.0.1/8,192.168.0.0/16,172.16.0.0/12,10.0.0.0/8,fd00::/8,::1'
+        PRIVATE_IP_RANGES='127.0.0.0/8,192.168.0.0/16,172.16.0.0/12,10.0.0.0/8,100.64.0.0/10,fd00::/8,::1/128'
         if ! echo "$COLLABORA_ALLOW_LIST" | grep -q "$PRIVATE_IP_RANGES"; then
             COLLABORA_ALLOW_LIST+=",$PRIVATE_IP_RANGES"
         fi
@@ -666,7 +786,7 @@ if [ "$COLLABORA_ENABLED" = 'yes' ]; then
         fi
         php /var/www/html/occ config:app:set richdocuments wopi_allowlist --value="$COLLABORA_ALLOW_LIST"
     else
-        echo "Warning: wopi_allowlist is empty which should not be the case!"
+        echo "Warning: wopi_allowlist is empty; this should not be the case!"
     fi
 else
     if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/richdocuments" ]; then
@@ -676,32 +796,52 @@ fi
 
 # OnlyOffice
 if [ "$ONLYOFFICE_ENABLED" = 'yes' ]; then
+    # Determine OnlyOffice port based on host pattern
     if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
         ONLYOFFICE_PORT=80
     else
         ONLYOFFICE_PORT=443
     fi
-    while ! nc -z "$ONLYOFFICE_HOST" "$ONLYOFFICE_PORT"; do
+
-        echo "waiting for OnlyOffice to become available..."
+    count=0
+    while ! nc -z "$ONLYOFFICE_HOST" "$ONLYOFFICE_PORT" && [ "$count" -lt 90 ]; do
+        echo "Waiting for OnlyOffice to become available..."
+        count=$((count+5))
         sleep 5
     done
-    if ! [ -d "/var/www/html/custom_apps/onlyoffice" ]; then
+    if [ "$count" -ge 90 ]; then
-        php /var/www/html/occ app:install onlyoffice
+        bash /notify.sh "Onlyoffice did not start in time!" "Skipping initialization and disabling onlyoffice app."
-    elif [ "$(php /var/www/html/occ config:app:get onlyoffice enabled)" != "yes" ]; then
+        php /var/www/html/occ app:disable onlyoffice
-        php /var/www/html/occ app:enable onlyoffice
+    else
-    elif [ "$SKIP_UPDATE" != 1 ]; then
+        # Install or enable OnlyOffice app as needed
-        php /var/www/html/occ app:update onlyoffice
+        if ! [ -d "/var/www/html/custom_apps/onlyoffice" ]; then
+            php /var/www/html/occ app:install onlyoffice
+        elif [ "$(php /var/www/html/occ config:app:get onlyoffice enabled)" != "yes" ]; then
+            php /var/www/html/occ app:enable onlyoffice
+        elif [ "$SKIP_UPDATE" != 1 ]; then
+            php /var/www/html/occ app:update onlyoffice
+        fi
+
+        # Set OnlyOffice configuration
+        php /var/www/html/occ config:system:set onlyoffice editors_check_interval --value="0" --type=integer 
+        php /var/www/html/occ config:system:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
+        php /var/www/html/occ config:app:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
+        php /var/www/html/occ config:system:set onlyoffice jwt_header --value="AuthorizationJwt"
+
+        # Adjust the OnlyOffice host if using internal pattern
+        if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
+            ONLYOFFICE_HOST="$NC_DOMAIN/onlyoffice"
+            export ONLYOFFICE_HOST
+        fi
+
+        php /var/www/html/occ config:app:set onlyoffice DocumentServerUrl --value="https://$ONLYOFFICE_HOST"
     fi
-    php /var/www/html/occ config:system:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
-    php /var/www/html/occ config:app:set onlyoffice jwt_secret --value="$ONLYOFFICE_SECRET"
-    php /var/www/html/occ config:system:set onlyoffice jwt_header --value="AuthorizationJwt"
-    if echo "$ONLYOFFICE_HOST" | grep -q "nextcloud-.*-onlyoffice"; then
-        ONLYOFFICE_HOST="$NC_DOMAIN/onlyoffice"
-        export ONLYOFFICE_HOST
-    fi
-    php /var/www/html/occ config:app:set onlyoffice DocumentServerUrl --value="https://$ONLYOFFICE_HOST"
 else
-    if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/onlyoffice" ] && [ -n "$ONLYOFFICE_SECRET" ] && [ "$(php /var/www/html/occ config:system:get onlyoffice jwt_secret)" = "$ONLYOFFICE_SECRET" ]; then
+    # Remove OnlyOffice app if disabled and removal is requested
+    if [ "$REMOVE_DISABLED_APPS" = yes ] && \
+       [ -d "/var/www/html/custom_apps/onlyoffice" ] && \
+       [ -n "$ONLYOFFICE_SECRET" ] && \
+       [ "$(php /var/www/html/occ config:system:get onlyoffice jwt_secret)" = "$ONLYOFFICE_SECRET" ]; then
         php /var/www/html/occ app:remove onlyoffice
     fi
 fi
@@ -747,14 +887,16 @@ fi
 if [ -d "/var/www/html/custom_apps/spreed" ]; then
     if [ "$TALK_RECORDING_ENABLED" = 'yes' ]; then
         while ! nc -z "$TALK_RECORDING_HOST" 1234; do
-            echo "waiting for Talk Recording to become available..."
+            echo "Waiting for Talk Recording to become available..."
             sleep 5
         done
         # TODO: migrate to occ command if that becomes available
         RECORDING_SERVERS_STRING="{\"servers\":[{\"server\":\"http://$TALK_RECORDING_HOST:1234/\",\"verify\":true}],\"secret\":\"$RECORDING_SECRET\"}"
         php /var/www/html/occ config:app:set spreed recording_servers --value="$RECORDING_SERVERS_STRING"
     else
-        php /var/www/html/occ config:app:delete spreed recording_servers
+        if [ "$REMOVE_DISABLED_APPS" = yes ]; then
+            php /var/www/html/occ config:app:delete spreed recording_servers
+        fi
     fi
 fi
 
@@ -762,12 +904,12 @@ fi
 if [ "$CLAMAV_ENABLED" = 'yes' ]; then
     count=0
     while ! nc -z "$CLAMAV_HOST" 3310 && [ "$count" -lt 90 ]; do
-        echo "waiting for clamav to become available..."
+        echo "Waiting for ClamAV to become available..."
         count=$((count+5))
         sleep 5
     done
     if [ "$count" -ge 90 ]; then
-        echo "Clamav did not start in time. Skipping initialization and disabling files_antivirus app."
+        bash /notify.sh "ClamAV did not start in time!" "Skipping initialization and disabling files_antivirus app."
         php /var/www/html/occ app:disable files_antivirus
     else
         if ! [ -d "/var/www/html/custom_apps/files_antivirus" ]; then
@@ -780,9 +922,13 @@ if [ "$CLAMAV_ENABLED" = 'yes' ]; then
         php /var/www/html/occ config:app:set files_antivirus av_mode --value="daemon"
         php /var/www/html/occ config:app:set files_antivirus av_port --value="3310"
         php /var/www/html/occ config:app:set files_antivirus av_host --value="$CLAMAV_HOST"
-        php /var/www/html/occ config:app:set files_antivirus av_stream_max_length --value="$CLAMAV_MAX_SIZE"
+        # av_stream_max_length must be synced with StreamMaxLength inside clamav
-        php /var/www/html/occ config:app:set files_antivirus av_max_file_size --value="$CLAMAV_MAX_SIZE"
+        php /var/www/html/occ config:app:set files_antivirus av_stream_max_length --value="2147483648"
+        php /var/www/html/occ config:app:set files_antivirus av_max_file_size --value="-1"
         php /var/www/html/occ config:app:set files_antivirus av_infected_action --value="only_log"
+        if [ -n "$CLAMAV_BLOCKLISTED_DIRECTORIES" ]; then
+            php /var/www/html/occ config:app:set files_antivirus av_blocklisted_directories --value="$CLAMAV_BLOCKLISTED_DIRECTORIES"
+        fi
     fi
 else
     if [ "$REMOVE_DISABLED_APPS" = yes ] && [ -d "/var/www/html/custom_apps/files_antivirus" ]; then
@@ -809,45 +955,57 @@ fi
 
 # Fulltextsearch
 if [ "$FULLTEXTSEARCH_ENABLED" = 'yes' ]; then
-    while ! nc -z "$FULLTEXTSEARCH_HOST" 9200; do
+    count=0
-        echo "waiting for Fulltextsearch to become available..."
+    while ! nc -z "$FULLTEXTSEARCH_HOST" "$FULLTEXTSEARCH_PORT" && [ "$count" -lt 90 ]; do
+        echo "Waiting for Fulltextsearch to become available..."
+        count=$((count+5))
         sleep 5
     done
-    if ! [ -d "/var/www/html/custom_apps/fulltextsearch" ]; then
+    if [ "$count" -ge 90 ]; then
-        php /var/www/html/occ app:install fulltextsearch
+        echo "Fulltextsearch did not start in time. Skipping initialization and disabling fulltextsearch apps."
-    elif [ "$(php /var/www/html/occ config:app:get fulltextsearch enabled)" != "yes" ]; then
+        php /var/www/html/occ app:disable fulltextsearch
-        php /var/www/html/occ app:enable fulltextsearch
+        php /var/www/html/occ app:disable fulltextsearch_elasticsearch
-    elif [ "$SKIP_UPDATE" != 1 ]; then
+        php /var/www/html/occ app:disable files_fulltextsearch
-        php /var/www/html/occ app:update fulltextsearch
+    else
-    fi    
+        if [ -z "$FULLTEXTSEARCH_PROTOCOL" ]; then
-    if ! [ -d "/var/www/html/custom_apps/fulltextsearch_elasticsearch" ]; then
+            FULLTEXTSEARCH_PROTOCOL="http"
-        php /var/www/html/occ app:install fulltextsearch_elasticsearch
+        fi
-    elif [ "$(php /var/www/html/occ config:app:get fulltextsearch_elasticsearch enabled)" != "yes" ]; then
+        if ! [ -d "/var/www/html/custom_apps/fulltextsearch" ]; then
-        php /var/www/html/occ app:enable fulltextsearch_elasticsearch
+            php /var/www/html/occ app:install fulltextsearch
-    elif [ "$SKIP_UPDATE" != 1 ]; then
+        elif [ "$(php /var/www/html/occ config:app:get fulltextsearch enabled)" != "yes" ]; then
-        php /var/www/html/occ app:update fulltextsearch_elasticsearch
+            php /var/www/html/occ app:enable fulltextsearch
-    fi    
+        elif [ "$SKIP_UPDATE" != 1 ]; then
-    if ! [ -d "/var/www/html/custom_apps/files_fulltextsearch" ]; then
+            php /var/www/html/occ app:update fulltextsearch
-        php /var/www/html/occ app:install files_fulltextsearch
+        fi    
-    elif [ "$(php /var/www/html/occ config:app:get files_fulltextsearch enabled)" != "yes" ]; then
+        if ! [ -d "/var/www/html/custom_apps/fulltextsearch_elasticsearch" ]; then
-        php /var/www/html/occ app:enable files_fulltextsearch
+            php /var/www/html/occ app:install fulltextsearch_elasticsearch
-    elif [ "$SKIP_UPDATE" != 1 ]; then
+        elif [ "$(php /var/www/html/occ config:app:get fulltextsearch_elasticsearch enabled)" != "yes" ]; then
-        php /var/www/html/occ app:update files_fulltextsearch
+            php /var/www/html/occ app:enable fulltextsearch_elasticsearch
-    fi
+        elif [ "$SKIP_UPDATE" != 1 ]; then
-    php /var/www/html/occ fulltextsearch:configure '{"search_platform":"OCA\\FullTextSearch_Elasticsearch\\Platform\\ElasticSearchPlatform"}'
+            php /var/www/html/occ app:update fulltextsearch_elasticsearch
-    php /var/www/html/occ fulltextsearch_elasticsearch:configure "{\"elastic_host\":\"http://elastic:$FULLTEXTSEARCH_PASSWORD@$FULLTEXTSEARCH_HOST:9200\",\"elastic_index\":\"nextcloud-aio\"}"
+        fi    
-    php /var/www/html/occ files_fulltextsearch:configure "{\"files_pdf\":\"1\",\"files_office\":\"1\"}"
+        if ! [ -d "/var/www/html/custom_apps/files_fulltextsearch" ]; then
+            php /var/www/html/occ app:install files_fulltextsearch
+        elif [ "$(php /var/www/html/occ config:app:get files_fulltextsearch enabled)" != "yes" ]; then
+            php /var/www/html/occ app:enable files_fulltextsearch
+        elif [ "$SKIP_UPDATE" != 1 ]; then
+            php /var/www/html/occ app:update files_fulltextsearch
+        fi
+        php /var/www/html/occ fulltextsearch:configure '{"search_platform":"OCA\\FullTextSearch_Elasticsearch\\Platform\\ElasticSearchPlatform"}'
+        php /var/www/html/occ fulltextsearch_elasticsearch:configure "{\"elastic_host\":\"$FULLTEXTSEARCH_PROTOCOL://$FULLTEXTSEARCH_USER:$FULLTEXTSEARCH_PASSWORD@$FULLTEXTSEARCH_HOST:$FULLTEXTSEARCH_PORT\",\"elastic_index\":\"$FULLTEXTSEARCH_INDEX\"}"
+        php /var/www/html/occ files_fulltextsearch:configure "{\"files_pdf\":true,\"files_office\":true}"
 
-    # Do the index
+        # Do the index
-    if ! [ -f "$NEXTCLOUD_DATA_DIR/fts-index.done" ]; then
+        if ! [ -f "$NEXTCLOUD_DATA_DIR/fts-index.done" ]; then
-        echo "Waiting 10s before activating FTS..."
+            echo "Waiting 10 seconds before activating fulltextsearch..."
-        sleep 10
+            sleep 10
-        echo "Activating fulltextsearch..."
+            echo "Activating fulltextsearch..."
-        if php /var/www/html/occ fulltextsearch:test && php /var/www/html/occ fulltextsearch:index "{\"errors\": \"reset\"}" --no-readline; then
+            if php /var/www/html/occ fulltextsearch:test && php /var/www/html/occ fulltextsearch:index "{\"errors\": \"reset\"}" --no-readline; then
-            touch "$NEXTCLOUD_DATA_DIR/fts-index.done"
+                touch "$NEXTCLOUD_DATA_DIR/fts-index.done"
-        else
+            else
-            echo "Fulltextsearch failed. Could not index."
+                echo "Fulltextsearch failed. Could not index."
-            echo "Feel free to follow https://github.com/nextcloud/all-in-one/discussions/1709 if you want to skip the indexing in the future."
+                echo "If you want to skip indexing in the future, see https://github.com/nextcloud/all-in-one/discussions/1709"
+            fi
         fi
     fi
 else

Containers/nextcloud/run-exec-commands.sh

@@ -19,11 +19,6 @@ else
         echo "Activating Collabora config..."
         php /var/www/html/occ richdocuments:activate-config
     fi
-    # OnlyOffice must work also if using manual-install
-    if [ "$ONLYOFFICE_ENABLED" = yes ]; then
-        echo "Activating OnlyOffice config..."
-        php /var/www/html/occ onlyoffice:documentserver --check
-    fi
 fi
 
 signal_handler() {

Containers/nextcloud/start.sh

@@ -8,7 +8,7 @@ fi
 # Only start container if database is accessible
 # POSTGRES_HOST must be set in the containers env vars and POSTGRES_PORT has a default above
 # shellcheck disable=SC2153
-while ! sudo -u www-data nc -z "$POSTGRES_HOST" "$POSTGRES_PORT"; do
+while ! sudo -E -u www-data nc -z "$POSTGRES_HOST" "$POSTGRES_PORT"; do
     echo "Waiting for database to start..."
     sleep 5
 done
@@ -25,7 +25,7 @@ fi
 # Fix false database connection on old instances
 if [ -f "/var/www/html/config/config.php" ]; then
     sleep 2
-    while ! sudo -u www-data psql -d "postgresql://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB" -c "select now()"; do
+    while ! sudo -E -u www-data psql -d "postgresql://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB" -c "select now()"; do
         echo "Waiting for the database to start..."
         sleep 5
     done
@@ -56,12 +56,12 @@ fi
 set +x
 
 # Check datadir permissions
-sudo -u www-data touch "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" &>/dev/null
+sudo -E -u www-data touch "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" &>/dev/null
 if ! [ -f "$NEXTCLOUD_DATA_DIR/this-is-a-test-file" ]; then
     chown -R www-data:root "$NEXTCLOUD_DATA_DIR"
     chmod 750 -R "$NEXTCLOUD_DATA_DIR"
 fi
-sudo -u www-data rm -f "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
+sudo -E -u www-data rm -f "$NEXTCLOUD_DATA_DIR/this-is-a-test-file"
 
 # Install additional dependencies
 if [ -n "$ADDITIONAL_APKS" ]; then
@@ -86,13 +86,15 @@ fi
 # Install additional php extensions
 if [ -n "$ADDITIONAL_PHP_EXTENSIONS" ]; then
     if ! [ -f "/additional-php-extensions-are-installed" ]; then
+        # Allow to disable imagick without having to enable it each time
+        if ! echo "$ADDITIONAL_PHP_EXTENSIONS" | grep -q imagick; then
+            # Remove the ini file as there is no docker-php-ext-disable script available
+            rm /usr/local/etc/php/conf.d/docker-php-ext-imagick.ini
+        fi
         read -ra ADDITIONAL_PHP_EXTENSIONS_ARRAY <<< "$ADDITIONAL_PHP_EXTENSIONS"
         for app in "${ADDITIONAL_PHP_EXTENSIONS_ARRAY[@]}"; do
             if [ "$app" = imagick ]; then
-                echo "Enabling Imagick..."
+                # imagick is already enabled by default, so does not need to be enabled anymore.
-                if ! docker-php-ext-enable imagick >/dev/null; then
-                    echo "Could not install PHP extension imagick!"
-                fi
                 continue
             fi
             # shellcheck disable=SC2086

Containers/notify-push/Dockerfile

@@ -1,5 +1,5 @@
 # syntax=docker/dockerfile:latest
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
@@ -11,6 +11,7 @@ RUN set -ex; \
         netcat-openbsd \
         tzdata \
         bash \
+        jq \
         openssl; \
 # Give root a random password
     echo "root:$(openssl rand -base64 12)" | chpasswd; \
@@ -22,4 +23,5 @@ ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/notify-push/start.sh

@@ -52,6 +52,10 @@ fi
 if [ -z "$REDIS_DB_INDEX" ]; then
     REDIS_DB_INDEX=0
 fi
+# Set a default value for REDIS_PORT
+if [ -z "$REDIS_PORT" ]; then
+    REDIS_PORT=6379
+fi
 # Set a default for db type
 if [ -z "$DATABASE_TYPE" ]; then
     DATABASE_TYPE=postgres
@@ -66,9 +70,21 @@ if [ "$POSTGRES_USER" = nextcloud ]; then
     export POSTGRES_USER
 fi
 
+# URL-encode passwords
+POSTGRES_PASSWORD="$(jq -rn --arg v "$POSTGRES_PASSWORD" '$v|@uri')"
+REDIS_HOST_PASSWORD="$(jq -rn --arg v "$REDIS_HOST_PASSWORD" '$v|@uri')"
+
+# Postgres root cert
+if [ -f "/nextcloud/data/certificates/POSTGRES" ]; then
+    CERT_OPTIONS="?sslmode=verify-ca&sslrootcert=/nextcloud/data/certificates/ca-bundle.crt"
+# Mysql root cert
+elif [ -f "/nextcloud/data/certificates/MYSQL" ]; then
+    CERT_OPTIONS="?sslmode=verify-ca&ssl-ca=/nextcloud/data/certificates/ca-bundle.crt"
+fi
+
 # Set sensitive values as env
-export DATABASE_URL="$DATABASE_TYPE://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB"
+export DATABASE_URL="$DATABASE_TYPE://$POSTGRES_USER:$POSTGRES_PASSWORD@$POSTGRES_HOST:$POSTGRES_PORT/$POSTGRES_DB$CERT_OPTIONS"
-export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
+export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST:$REDIS_PORT/$REDIS_DB_INDEX"
 
 # Run it
 /nextcloud/custom_apps/notify_push/bin/"$CPU_ARCH"/notify_push \

Containers/onlyoffice/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
 # From https://github.com/ONLYOFFICE/Docker-DocumentServer/blob/master/Dockerfile
-FROM onlyoffice/documentserver:8.3.3.1
+FROM onlyoffice/documentserver:9.2.1.1
 
 # USER root is probably used
 
@@ -8,4 +8,5 @@ COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
 HEALTHCHECK --start-period=60s --retries=9 CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/postgresql/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
-# From https://github.com/docker-library/postgres/blob/master/17/alpine3.21/Dockerfile
+# From https://github.com/docker-library/postgres/blob/master/17/alpine3.23/Dockerfile
-FROM postgres:17.5-alpine
+FROM postgres:17.7-alpine
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
@@ -44,4 +44,5 @@ ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/postgresql/start.sh

@@ -128,7 +128,9 @@ EOSQL
     fi
 
     # Shut down the database to be able to start it again
-    pg_ctl stop -m fast
+    # The smart mode disallows new connections, then waits for all existing clients to disconnect and any online backup to finish
+    # Wait for 1800s to make sure that a checkpoint is completed successfully
+    pg_ctl stop -m smart -t 1800
 
     # Change database port back to default
     export PGPORT=5432

Containers/redis/Dockerfile

@@ -1,6 +1,6 @@
 # syntax=docker/dockerfile:latest
-# From https://github.com/docker-library/redis/blob/master/7.2/alpine/Dockerfile
+# From https://github.com/redis/docker-library-redis/blob/release/8.2/alpine/Dockerfile
-FROM redis:7.2.9-alpine
+FROM redis:8.2.3-alpine
 
 COPY --chmod=775 start.sh /start.sh
 
@@ -21,4 +21,5 @@ ENTRYPOINT ["/start.sh"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/talk-recording/Dockerfile

@@ -1,10 +1,10 @@
 # syntax=docker/dockerfile:latest
-FROM python:3.13.5-alpine3.21
+FROM python:3.14.2-alpine3.23
 
 COPY --chmod=775 start.sh /start.sh
 COPY --chmod=775 healthcheck.sh /healthcheck.sh
 
-ENV RECORDING_VERSION=v0.1
+ENV RECORDING_VERSION=v0.2.1
 ENV ALLOW_ALL=false
 ENV HPB_PROTOCOL=https
 ENV NC_PROTOCOL=https
@@ -58,4 +58,5 @@ CMD ["python", "-m", "nextcloud.talk.recording", "--config", "/conf/recording.co
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/talk-recording/recording.conf

@@ -1,3 +1,5 @@
+# SPDX-FileCopyrightText: 2023 Nextcloud GmbH and Nextcloud contributors
+# SPDX-License-Identifier: AGPL-3.0-or-later
 [logs]
 # Log level based on numeric values of Python logging levels:
 # - Critical: 50
@@ -12,6 +14,11 @@
 # IP and port to listen on for HTTP requests.
 #listen = 127.0.0.1:8000
 
+[app]
+# Comma separated list of trusted proxies (IPs or CIDR networks) that may set
+# the "X-Forwarded-For" header.
+#trustedproxies =
+
 [backend]
 # Allow any hostname as backend endpoint. This is extremely insecure and should
 # only be used during development.
@@ -100,6 +107,18 @@
 # ffmpeg. The options given here fully override the default global options.
 #common = ffmpeg -loglevel level+warning -n
 
+# The (additional) options given to ffmpeg for the audio input. The options
+# given here extend the default options for the audio input, although they do
+# not override them.
+# Default options: '-f pulse -i {AUDIO_SOURCE}'
+#inputaudio =
+
+# The (additional) options given to ffmpeg for the video input. The options
+# given here extend the default options for the video input, although they do
+# not override them.
+# Default options: '-f x11grab -draw_mouse 0 -video_size {WIDTH}x{HEIGHT} -i {VIDEO_SOURCE}'
+#inputvideo =
+
 # The options given to ffmpeg to encode the audio output. The options given here
 # fully override the default options for the audio output.
 #outputaudio = -c:a libopus
@@ -120,4 +139,31 @@
 # will use Google Chrome, or Chromium if Google Chrome is not installed.
 # Allowed values: firefox, chrome
 # Defaults to firefox
-# browser = firefox
+#browser = firefox
+
+# Path to the Selenium driver to use for recordings.
+# If set the driver must match the browser being used (for example,
+# "/usr/bin/geckodriver" for "firefox"). If no driver is explicitly set Selenium
+# Manager will try to find the right one in $PATH, downloading it as a fallback.
+# Note that Selenium Manager does not work in some architectures (for example,
+# Linux on arm64/aarch64), so in those architectures the driver must be
+# explicitly set.
+#driverPath =
+
+# Path to the browser executable to use for recordings.
+# If set the executable must match the browser being used (for example,
+# "/usr/bin/firefox-esr" for "firefox"). If no executable is explicitly set
+# Selenium Manager will try to find the right one in $PATH. Depending on the
+# installed Selenium version if the executable is not found Selenium Manager may
+# also download the browser as a fallback.
+# Note that Selenium Manager does not work in some architectures (for example,
+# Linux on arm64/aarch64); in those architectures the Selenium driver will try
+# to find the executable, but the executable may need to be explicitly set if
+# not found by the driver.
+#browserPath =
+
+[stats]
+# Comma-separated list of IP addresses (or CIDR networks) that are allowed to
+# access the stats endpoint.
+# Leave commented to only allow access from "127.0.0.1".
+#allowed_ips =

Containers/talk-recording/start.sh

@@ -59,6 +59,8 @@ extensionvideo = .webm
 
 [recording]
 browser = firefox
+driverPath = /usr/bin/geckodriver
+browserPath = /usr/bin/firefox
 RECORDING_CONF
 
 exec "$@"

Containers/talk/Dockerfile

@@ -1,10 +1,10 @@
 # syntax=docker/dockerfile:latest
-FROM nats:2.11.6-scratch AS nats
+FROM nats:2.12.3-scratch AS nats
-FROM eturnal/eturnal:1.12.1 AS eturnal
+FROM eturnal/eturnal:1.12.2-alpine AS eturnal
-FROM strukturag/nextcloud-spreed-signaling:2.0.3 AS signaling
+FROM strukturag/nextcloud-spreed-signaling:2.0.4 AS signaling
-FROM alpine:3.21.3 AS janus
+FROM alpine:3.23.2 AS janus
 
-ARG JANUS_VERSION=v1.3.1
+ARG JANUS_VERSION=v1.3.3
 WORKDIR /src
 RUN set -ex; \
     apk upgrade --no-cache -a; \
@@ -35,7 +35,7 @@ RUN set -ex; \
     make configs; \
     rename -v ".jcfg.sample" ".jcfg" /usr/local/etc/janus/*.jcfg.sample
 
-FROM alpine:3.21.3
+FROM alpine:3.23.2
 ENV ETURNAL_ETC_DIR="/conf"
 ENV SKIP_CERT_VERIFY=false
 COPY --from=janus     --chmod=777 --chown=1000:1000 /usr/local                          /usr/local
@@ -107,4 +107,5 @@ CMD ["supervisord", "-c", "/supervisord.conf"]
 
 HEALTHCHECK CMD /healthcheck.sh
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/talk/server.conf.in

@@ -84,7 +84,8 @@ internalsecret = the-shared-secret-for-internal-clients
 # For backend type "etcd":
 # Key prefix of backend entries. All keys below will be watched and assumed to
 # contain a JSON document with the following entries:
-# - "url": Url of the Nextcloud instance.
+# - "urls": List of urls of the Nextcloud instance.
+# - "url": Url of the Nextcloud instance (deprecated).
 # - "secret": Shared secret for requests from and to the backend servers.
 #
 # Additional optional entries:
@@ -93,8 +94,8 @@ internalsecret = the-shared-secret-for-internal-clients
 # - "sessionlimit": Number of sessions that are allowed to connect.
 #
 # Example:
-# "/signaling/backend/one" -> {"url": "https://nextcloud.domain1.invalid", ...}
+# "/signaling/backend/one" -> {"urls": ["https://nextcloud.domain1.invalid"], ...}
-# "/signaling/backend/two" -> {"url": "https://domain2.invalid/nextcloud", ...}
+# "/signaling/backend/two" -> {"urls": ["https://domain2.invalid/nextcloud"], ...}
 #backendprefix = /signaling/backend
 
 # Allow any hostname as backend endpoint. This is extremely insecure and should
@@ -122,8 +123,8 @@ connectionsperhost = 8
 # Backend configurations as defined in the "[backend]" section above. The
 # section names must match the ids used in "backends" above.
 #[backend-id]
-# URL of the Nextcloud instance
+# Comma-separated list of urls of the Nextcloud instance
-#url = https://cloud.domain.invalid
+#urls = https://cloud.domain.invalid
 
 # Shared secret for requests from and to the backend servers. Leave empty to use
 # the common shared secret from above.
@@ -143,8 +144,8 @@ connectionsperhost = 8
 #maxscreenbitrate = 2097152
 
 #[another-backend]
-# URL of the Nextcloud instance
+# Comma-separated list of urls of the Nextcloud instance
-#url = https://cloud.otherdomain.invalid
+#urls = https://cloud.otherdomain.invalid
 
 # Shared secret for requests from and to the backend servers. Leave empty to use
 # the common shared secret from above.
@@ -179,6 +180,13 @@ connectionsperhost = 8
 # proxy server that is used.
 #maxscreenbitrate = 2097152
 
+# List of IP addresses / subnets that are allowed to be used by clients in
+# candidates. The allowed list has preference over the blocked list below.
+#allowedcandidates = 10.0.0.0/8
+
+# List of IP addresses / subnets to filter from candidates received by clients.
+#blockedcandidates = 1.2.3.0/24
+
 # For type "proxy": timeout in seconds for requests to the proxy server.
 #proxytimeout = 2
 

Containers/talk/start.sh

@@ -98,7 +98,7 @@ connectionsperhost = 8
 skipverify = ${SKIP_CERT_VERIFY}
 
 [backend-1]
-url = https://${NC_DOMAIN}
+urls = https://${NC_DOMAIN}
 secret = ${SIGNALING_SECRET}
 maxstreambitrate = ${TALK_MAX_STREAM_BITRATE}
 maxscreenbitrate = ${TALK_MAX_SCREEN_BITRATE}

Containers/watchtower/Dockerfile

@@ -1,13 +1,21 @@
 # syntax=docker/dockerfile:latest
-FROM ghcr.io/nicholas-fedor/watchtower:1.11.5 AS watchtower
+FROM golang:1.25.6-alpine3.23 AS go
 
-FROM alpine:3.21.3
+ENV WATCHTOWER_COMMIT_HASH=f522ce27e1fbe4618da54833025a95be62aa838a	
+
+RUN set -ex; \
+    apk upgrade --no-cache -a; \
+    apk add --no-cache \
+        build-base; \
+    go install github.com/nicholas-fedor/watchtower@$WATCHTOWER_COMMIT_HASH # v1.14.0
+
+FROM alpine:3.23.2
 
 RUN set -ex; \
     apk upgrade --no-cache -a; \
     apk add --no-cache bash ca-certificates tzdata
 
-COPY --from=watchtower /watchtower /watchtower
+COPY --from=go /go/bin/watchtower /watchtower
 
 COPY --chmod=775 start.sh /start.sh
 
@@ -16,4 +24,5 @@ USER root
 
 ENTRYPOINT ["/start.sh"]
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/watchtower/start.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Check if socket is available and readable
-if ! [ -a "/var/run/docker.sock" ]; then
+if ! [ -e "/var/run/docker.sock" ]; then
     echo "Docker socket is not available. Cannot continue."
     exit 1
 elif ! test -r /var/run/docker.sock; then

Containers/whiteboard/Dockerfile

@@ -1,12 +1,16 @@
 # syntax=docker/dockerfile:latest
 # Probably from this file: https://github.com/nextcloud/whiteboard/blob/main/Dockerfile
-FROM ghcr.io/nextcloud-releases/whiteboard:v1.1.2
+FROM ghcr.io/nextcloud-releases/whiteboard:v1.5.3
 
 USER root
 RUN set -ex; \
-    apk upgrade --no-cache -a; \
+    apk add --no-cache bash jq; \
-    apk add --no-cache bash; \
+    chmod 777 -R /tmp; \
-    chmod 777 -R /tmp
+    if [ -f /usr/lib/chromium/chrome_crashpad_handler ] && [ ! -f /usr/lib/chromium/chrome_crashpad_handler.real ]; then \
+        mv /usr/lib/chromium/chrome_crashpad_handler /usr/lib/chromium/chrome_crashpad_handler.real; \
+        printf '%s\n' '#!/bin/sh' "exec /usr/lib/chromium/chrome_crashpad_handler.real --no-periodic-tasks --database=\"\${CRASHPAD_DATABASE:-/tmp/chrome-crashpad}\" \"\$@\"" >/usr/lib/chromium/chrome_crashpad_handler; \
+        chmod +x /usr/lib/chromium/chrome_crashpad_handler; \
+    fi
 USER 65534
 
 COPY --chmod=775 start.sh /start.sh
@@ -19,4 +23,5 @@ WORKDIR /tmp
 ENTRYPOINT ["/start.sh"]
 
 LABEL com.centurylinklabs.watchtower.enable="false" \
+    wud.watch="false" \
     org.label-schema.vendor="Nextcloud"

Containers/whiteboard/healthcheck.sh

@@ -1,4 +1,4 @@
 #!/bin/bash
 
-nc -z "$REDIS_HOST" 6379 || exit 0
+nc -z "$REDIS_HOST" "$REDIS_PORT" || exit 0
 nc -z 127.0.0.1 3002 || exit 1

Containers/whiteboard/start.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 
 # Only start container if nextcloud is accessible
-while ! nc -z "$REDIS_HOST" 6379; do
+while ! nc -z "$REDIS_HOST" "$REDIS_PORT"; do
     echo "Waiting for redis to start..."
     sleep 5
 done
@@ -11,7 +11,10 @@ if [ -z "$REDIS_DB_INDEX" ]; then
     REDIS_DB_INDEX=0
 fi
 
-export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST/$REDIS_DB_INDEX"
+# URL-encode password
+REDIS_HOST_PASSWORD="$(jq -rn --arg v "$REDIS_HOST_PASSWORD" '$v|@uri')"
+
+export REDIS_URL="redis://$REDIS_USER:$REDIS_HOST_PASSWORD@$REDIS_HOST:$REDIS_PORT/$REDIS_DB_INDEX"
 
 # Run it
 exec npm --prefix /app run server:start

app/appinfo/info.xml

@@ -13,7 +13,7 @@
 	<category>monitoring</category>
 	<bugs>https://github.com/nextcloud/all-in-one/issues</bugs>
 	<dependencies>
-		<nextcloud min-version="30" max-version="31"/>
+		<nextcloud min-version="31" max-version="32"/>
 	</dependencies>
 
 	<settings>

community-containers/borgbackup-viewer/readme.md

@@ -5,7 +5,7 @@ This container allows to view the local borg repository in a web session. It als
 - After adding and starting the container, you need to visit `https://ip.address.of.this.server:5801` in order to log in with the user `nextcloud` and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning).
 - Then, you should see a terminal. There type in `borg mount /mnt/borgbackup/borg /tmp/borg` to mount the backup archive at `/tmp/borg` inside the container. Afterwards type in `nautilus /tmp/borg` which will show a file explorer and allows you to see all the files. You can then copy files and folders back to their initial mountpoints inside `/nextcloud_aio_volumes/`, `/host_mounts/` and `/docker_volumes/`. ⚠️ Be very carefully while doing that as can break your instance!
 - After you are done with the operation, click on the terminal in the background and press `[CTRL]+[c]` multiple times to close any open application. Then run `umount /tmp/borg` to unmount the mountpoint correctly.
-- You can also delete specific archives by running `borg list`,  delete a specific archive e.g. via `borg delete --stats --progress "::20220223_174237-nextcloud-aio"` and compact the archives via `borg compact`. After doing so, make sure to update the backup archives list in the AIO interface! You can do so by clicking on the `Check backup integrity` button or `Create backup` button.
+- You can also delete specific archives by running `borg list`,  delete a specific archive e.g. via `borg delete --stats --progress "::20220223_174237-nextcloud-aio"` and compact the archives via `borg compact`. After doing so, make sure to update the backup archives list in the AIO interface! You can do so by clicking on the `Update backup list` button in the `Update backup list` section inside the `Backup and restore` section.
 - ⚠️ After you are done doing your operations, remove the container for better security again from the stack: https://github.com/nextcloud/all-in-one/tree/main/community-containers#how-to-remove-containers-from-aios-stack
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 

community-containers/caddy/caddy.json

@@ -5,7 +5,7 @@
             "display_name": "Caddy with geoblocking",
             "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy",
             "image": "ghcr.io/szaimen/aio-caddy",
-            "image_tag": "v2",
+            "image_tag": "v4",
             "internal_port": "443",
             "restart": "unless-stopped",
             "ports": [
@@ -13,17 +13,14 @@
                   "ip_binding": "",
                   "port_number": "443",
                   "protocol": "tcp"
-                },
-                {
-                    "ip_binding": "",
-                    "port_number": "443",
-                    "protocol": "udp"
                 }
             ],
             "environment": [
                 "TZ=%TIMEZONE%",
                 "NC_DOMAIN=%NC_DOMAIN%",
-                "APACHE_PORT=%APACHE_PORT%"
+                "APACHE_PORT=%APACHE_PORT%",
+                "APACHE_IP_BINDING=%APACHE_IP_BINDING%",
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD=%NEXTCLOUD_EXPORTER_CADDY_PASSWORD%"
             ],
             "volumes": [
                 {
@@ -37,9 +34,14 @@
                     "writeable": false
                 }
             ],
+            "secrets": [
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD"
+            ],
             "aio_variables": [
                 "apache_ip_binding=@INTERNAL",
-                "apache_port=11000"
+                "apache_port=11000",
+                "turn_domain=%NC_DOMAIN%",
+                "talk_port=443"
             ],
             "nextcloud_exec_commands": [
                 "mkdir '/mnt/ncdata/admin/files/nextcloud-aio-caddy'",

community-containers/caddy/readme.md

@@ -1,19 +1,24 @@
 ## Caddy with geoblocking
-This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed.
+This container bundles caddy and auto-configures it for you. It also covers [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden) by listening on `bw.$NC_DOMAIN`, if installed. It also covers [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart) by listening on `mail.$NC_DOMAIN`, if installed. It also covers [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin) by listening on `media.$NC_DOMAIN`, if installed. It also covers [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap) by listening on `ldap.$NC_DOMAIN`, if installed. It also covers [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb) by listening on `tables.$NC_DOMAIN`, if installed. It also covers [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr) by listening on `requests.$NC_DOMAIN`, if installed. It also covers [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter) by listening on `metrics.$NC_DOMAIN`, if installed.
 
 ### Notes
 - This container is incompatible with the [npmplus](https://github.com/nextcloud/all-in-one/tree/main/community-containers/npmplus) community container. So make sure that you do not enable both at the same time!
-- Make sure that no other service is using port 443 on your host as otherwise the containers will fail to start. You can check this with `sudo netstat -tulpn | grep 443` before installing AIO.
+- Make sure that no other service is using port 443/tcp on your host as otherwise the containers will fail to start. You can check this with `sudo netstat -tulpn | grep 443` before installing AIO.
+- Starting with AIO v12, the Talk port that was usually exposed on port 3478 is now set to port 443 udp and tcp and reachable via `your-nc-domain.com`. For the changes to become activated, you need to go to `https://your-nc-domain.com/settings/admin/talk` and delete all turn and stun servers. Then restart the containers and the new config should become active.
+- Starting with AIO v12, you can also limit vaultwarden, stalwart and lldap to certain ip-addresses. You can do so by creating a `allowed-IPs-vaultwarden.txt`, `allowed-IPs-stalwart.txt`, or `allowed-IPs-lldap.txt` file in the `nextcloud-aio-caddy` directory of your admin user and adding the ip-addresses in these files.
+- The container also supports the proxy protocol inside caddy. That means that you can run a supported web server in front of port 443/tcp and use the proxy protocol. You can enable this by configuring the `APACHE_IP_BINDING` environmental variable for the mastercontainer and set it to an ip-address from which the protocol shall be accepted. ⚠️ Note that the initial domain validation will not work correctly if you want to use the proxy protocol. So make sure to skip the domain validation in that case. See the [documentation](https://github.com/nextcloud/all-in-one#how-to-skip-the-domain-validation).
 - If you want to use this with [vaultwarden](https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden), make sure that you point `bw.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for vaultwarden.
 - If you want to use this with [stalwart](https://github.com/nextcloud/all-in-one/tree/main/community-containers/stalwart), make sure that you point `mail.your-nc-domain.com` to your server using an A, AAAA or CNAME record so that caddy can get a certificate automatically for stalwart.
 - If you want to use this with [jellyfin](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin), make sure that you point `media.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyfin.
 - If you want to use this with [lldap](https://github.com/nextcloud/all-in-one/tree/main/community-containers/lldap), make sure that you point `ldap.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for lldap.
 - If you want to use this with [nocodb](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nocodb), make sure that you point `tables.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nocodb.
 - If you want to use this with [jellyseerr](https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyseerr), make sure that you point `requests.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for jellyseerr.
+- If you want to use this with [nextcloud-exporter](https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter), make sure that you point `metrics.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for nextcloud-exporter.
 - If you want to use this with [local AI with vulkan support](https://github.com/nextcloud/all-in-one/tree/main/community-containers/local-ai-vulkan), make sure that you point `ai.your-nc-domain.com` to your server using a cname record so that caddy can get a certificate automatically for local AI.
 - After the container was started the first time, you should see a new `nextcloud-aio-caddy` folder and inside there an `allowed-countries.txt` file when you open the files app with the default `admin` user. In there you can adjust the allowed country codes for caddy by adding them to the first line, e.g. `IT FR` would allow access from italy and france. Private ip-ranges are always allowed. Additionally, in order to activate this config, you need to get an account at https://dev.maxmind.com/geoip/geolite2-free-geolocation-data and download the `GeoLite2-Country.mmdb` and upload it with this exact name into the `nextcloud-aio-caddy` folder. Afterwards restart all containers from the AIO interface and your new config should be active!
 - You can add your own Caddy configurations in `/data/caddy-imports/` inside the Caddy container (`sudo docker exec -it nextcloud-aio-caddy bash`). These will be imported on container startup. **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+- If you want to remove the container again and revert back to the default, you need to disable the container via the AIO-interface and follow https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md#8-removing-the-reverse-proxy
 
 ### Repository
 https://github.com/szaimen/aio-caddy

community-containers/calcardbackup/readme.md

@@ -2,7 +2,7 @@
 This container packages calcardbackup which is a tool that exports calendars and addressbooks from Nextcloud to .ics and .vcf files and saves them to a compressed file.
   
 ### Notes  
-- Backups will be created at 00:00 CEST every day. Make sure that this does not conflict with the configured daily backups inside AIO.
+- Backups will be created at 00:00 UTC every day. Make sure that this does not conflict with the configured daily backups inside AIO.
 - All the exports will be included in AIOs backup solution
 - You can find the exports in the nextcloud_aio_calcardbackup volume
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack  

community-containers/facerecognition/facerecognition.json

@@ -10,18 +10,21 @@
             "restart": "unless-stopped",
             "environment": [
                 "TZ=%TIMEZONE%",
-                "API_KEY=some-super-secret-api-key",
+                "API_KEY=%FACERECOGNITION_API_KEY%",
                 "FACE_MODEL=3"
             ],
             "aio_variables": [
                 "nextcloud_memory_limit=2048M"
             ],
+            "secrets": [
+                "FACERECOGNITION_API_KEY"
+            ],
             "enable_nvidia_gpu": false,
             "nextcloud_exec_commands": [
                 "php /var/www/html/occ app:install facerecognition",
                 "php /var/www/html/occ app:enable facerecognition", 
                 "php /var/www/html/occ config:system:set facerecognition.external_model_url --value nextcloud-aio-facerecognition:5000",
-                "php /var/www/html/occ config:system:set facerecognition.external_model_api_key --value some-super-secret-api-key",
+                "php /var/www/html/occ config:system:set facerecognition.external_model_api_key --value %FACERECOGNITION_API_KEY%",
                 "php /var/www/html/occ face:setup -m 5",
                 "php /var/www/html/occ face:setup -M 1G",
                 "php /var/www/html/occ config:app:set facerecognition analysis_image_area --value 4320000",

community-containers/languagetool/languagetool.json

@@ -0,0 +1,16 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-languagetool",
+            "display_name": "LanguageTool for Collabora",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/languagetool",
+            "image": "erikvl87/languagetool",
+            "image_tag": "latest",
+            "internal_port": "8010",
+            "restart": "unless-stopped",
+            "environment": [
+                "TZ=%TIMEZONE%"
+            ]
+        }
+    ]
+}

community-containers/languagetool/readme.md

@@ -0,0 +1,13 @@
+## LanguageTool for Collabora
+This container bundles a LanguageTool for Collabora which adds spell checking functionality to Collabora.
+
+### Notes
+- Make sure to have collabora enabled via the AIO interface
+- After adding this container via the AIO Interface, while all containers are still stopped, you need to scroll down to the `Additional Collabora options` section and enter `--o:languagetool.enabled=true --o:languagetool.base_url=http://nextcloud-aio-languagetool:8010/v2`.
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/Erikvl87/docker-languagetool
+
+### Maintainer
+https://github.com/szaimen

community-containers/lldap/lldap.json

@@ -27,7 +27,7 @@
         "LLDAP_JWT_SECRET",
         "LLDAP_LDAP_USER_PASS"
       ],
-      "ui_secret": "LLDAP_JWT_SECRET",
+      "ui_secret": "LLDAP_LDAP_USER_PASS",
       "volumes": [
         {
           "source": "nextcloud_aio_lldap",

community-containers/lldap/readme.md

@@ -18,10 +18,7 @@ Functionality with this configuration:
 
 > For simplicity, this configuration is done via the command line (don't worry, it's very simple).
 
-First, you need to retrieve the LLDAP admin password, this will be used later on. Which you need to type in or copy and paste:
+First, you need to retrieve the LLDAP admin password that you can see next to the container in the AIO interface. There you can configure smtp first and then invite users via mail.
-```bash
-sudo docker inspect nextcloud-aio-lldap | grep LLDAP_LDAP_USER_PASS
-```
 
 Now go into the Nextcloud container:<br>
 **Please note:** If you do not have CLI access to the server, you can now run docker commands via a web session by using this community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/container-management. This script below can be run from inside the container-management container via `bash /lldap.sh`.

community-containers/makemkv/readme.md

@@ -5,7 +5,7 @@ This container bundles MakeMKV and auto-configures it for you.
 - This container should only be run in home networks
 - ⚠️ This container mounts all devices from the host inside the container in order to be able to access the external DVD/Blu-ray drives which is a security issue. However no better solution was found for the time being.
 - This container only works on Linux and not on Docker-Desktop.
-- This container requires the [`NEXTCLOUD_MOUNT` variable in AIO to be set](https://github.com/nextcloud/all-in-one?tab=readme-ov-file#how-to-allow-the-nextcloud-container-to-access-directories-on-the-host). Otherwise the output will not be saved correctly..
+- This container requires the [`NEXTCLOUD_MOUNT` variable in AIO to be set](https://github.com/nextcloud/all-in-one#how-to-allow-the-nextcloud-container-to-access-directories-on-the-host). Otherwise the output will not be saved correctly..
 - After adding and starting the container, you need to visit `https://internal.ip.of.server:5802` in order to log in with the `makemkv` user and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning).
 - After the first login, you can adjust the `/output` directory in the MakeMKV settings to a subdirectory of the root of your chosen `NEXTCLOUD_MOUNT`. (by default `NEXTCLOUD_MOUNT` is mounted to `/output` inside the container. Thus all data is written to the root of it)
 - The configured `NEXTCLOUD_DATADIR` is getting mounted to `/storage` inside the container.

community-containers/minio/minio.json

@@ -0,0 +1,41 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-minio",
+            "image_tag": "v2",
+            "display_name": "Minio S3 Storage",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/minio",
+            "image": "ghcr.io/szaimen/aio-minio",
+            "internal_port": "9000",
+            "environment": [
+                "MINIO_ROOT_USER=nextcloud",
+                "MINIO_ROOT_PASSWORD=%MINIO_ROOT_PASSWORD%"
+            ],
+            "secrets": [
+                "MINIO_ROOT_PASSWORD"
+            ],
+            "volumes": [
+            {
+                "source": "nextcloud_aio_minio",
+                "destination": "/data",
+                "writeable": true
+            }
+            ],
+            "backup_volumes": [
+                "nextcloud_aio_minio"
+            ],
+            "nextcloud_exec_commands": [
+                "php /var/www/html/occ config:system:set objectstore class --value 'OC\\Files\\ObjectStore\\S3'",
+                "php /var/www/html/occ config:system:set objectstore arguments autocreate --value true --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments use_path_style --value true --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments use_ssl --value false --type bool",
+                "php /var/www/html/occ config:system:set objectstore arguments region --value ''",
+                "php /var/www/html/occ config:system:set objectstore arguments bucket --value nextcloud",
+                "php /var/www/html/occ config:system:set objectstore arguments key --value nextcloud",
+                "php /var/www/html/occ config:system:set objectstore arguments secret --value %MINIO_ROOT_PASSWORD%",
+                "php /var/www/html/occ config:system:set objectstore arguments port --value 9000",
+                "php /var/www/html/occ config:system:set objectstore arguments hostname --value nextcloud-aio-minio"
+            ]
+        }
+    ]
+}

community-containers/minio/readme.md

@@ -0,0 +1,18 @@
+## Minio
+This container bundles minio s3 storage and auto-configures it for you.
+
+>[!WARNING]
+> Enabling this container will remove access to all the files formerly written to the data directory.
+> So only enable this on a clean instance directly after installing AIO.
+> All additional users that are added via Nextcloud afterwards are going to work correctly.
+> Also, after enabling and using it, make sure to not disable the container as you cannot migrate from s3 to local storage anymore and s3 is a critical part of your infrastructure from then on.
+
+### Notes
+- The data of Minio will be automatically included in AIOs backup solution!
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/szaimen/aio-minio
+
+### Maintainer
+https://github.com/szaimen

community-containers/nextcloud-exporter/nextcloud-exporter.json

@@ -0,0 +1,35 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-nextcloud-exporter",
+            "display_name": "Prometheus Nextcloud Exporter",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/nextcloud-exporter",
+            "image": "ghcr.io/xperimental/nextcloud-exporter",
+            "image_tag": "0.9.0",
+            "internal_port": "9205",
+            "restart": "unless-stopped",
+            "ports": [
+                {
+                  "ip_binding": "127.0.0.1",
+                  "port_number": "9205",
+                  "protocol": "tcp"
+                }
+            ],
+            "environment": [
+                "TZ=%TIMEZONE%",
+                "NEXTCLOUD_SERVER=https://%NC_DOMAIN%",
+                "NEXTCLOUD_AUTH_TOKEN=%NEXTCLOUD_EXPORTER_TOKEN%",
+                "NEXTCLOUD_LISTEN_ADDRESS=0.0.0.0:9205",
+                "NEXTCLOUD_TIMEOUT=5s"
+            ],
+            "ui_secret": "NEXTCLOUD_EXPORTER_CADDY_PASSWORD",
+            "secrets": [
+                "NEXTCLOUD_EXPORTER_TOKEN",
+                "NEXTCLOUD_EXPORTER_CADDY_PASSWORD"
+            ],
+            "nextcloud_exec_commands": [
+                "php /var/www/html/occ config:app:set serverinfo token --value %NEXTCLOUD_EXPORTER_TOKEN%"
+            ]
+        }
+    ]
+}

community-containers/nextcloud-exporter/readme.md

@@ -0,0 +1,72 @@
+## Prometheus Nextcloud Exporter
+
+A Prometheus exporter that collects metrics from your Nextcloud instance for monitoring and alerting.
+
+### How to install
+
+See the [Community Containers documentation](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) for instructions on how to install this in your Nextcloud All-in-One setup.
+
+### Security & Access
+
+**Important:** This container is configured to bind only to `127.0.0.1` (localhost) for security reasons. Prometheus exporters typically don't include authentication, so direct network exposure is not recommended.
+
+#### Access Options
+
+1. **With Caddy Container (Recommended)**: If you also install the [Caddy community container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy), it will automatically configure secure HTTPS access to your metrics with authentication at `metrics.your-domain.com`
+
+   **Getting Authentication Credentials**: 
+   - **Username**: Always `metrics`
+   - **Password**: After deploying the nextcloud-exporter container, the automatically generated password will be displayed in the AIO interface. Look for it in the container section below the container name "Prometheus Nextcloud Exporter". 
+
+2. **Custom Reverse Proxy**: Set up your own reverse proxy (nginx, Apache, etc.) to provide HTTPS and authentication. See configuration guides:
+   - [NGINX Authentication](https://nginx.org/en/docs/http/ngx_http_auth_basic_module.html) + [Reverse Proxy](https://docs.nginx.com/nginx/admin-guide/web-server/reverse-proxy/)
+   - [Apache Authentication](https://httpd.apache.org/docs/2.4/howto/auth.html) + [Reverse Proxy](https://httpd.apache.org/docs/2.4/mod/mod_proxy.html)
+   - [Traefik BasicAuth](https://doc.traefik.io/traefik/middlewares/http/basicauth/)
+   - [Prometheus Security Best Practices](https://prometheus.io/docs/operating/security/)
+
+3. **Direct Local Access**: Access metrics directly from the server at `http://127.0.0.1:9205/metrics` (no authentication)
+
+### What it monitors
+- User activity (active users hourly, daily)
+- File counts and storage usage
+- System health and database size
+- App statistics and update availability
+- Nextcloud performance metrics
+
+### Prometheus Configuration
+
+For **local server access** (if Prometheus runs on the same server):
+```yaml
+scrape_configs:
+  - job_name: 'nextcloud'
+    scrape_interval: 90s
+    static_configs:
+      - targets: ['127.0.0.1:9205']
+    metrics_path: /metrics
+    scheme: http
+```
+
+For **Caddy integration** (secure external access):
+```yaml
+scrape_configs:
+  - job_name: 'nextcloud'
+    scrape_interval: 90s
+    static_configs:
+      - targets: ['metrics.your-domain.com']
+    metrics_path: /
+    scheme: https
+    basic_auth:
+      username: 'metrics'
+      password: 'your-generated-password'
+```
+
+### Visualization
+
+Compatible with Grafana for creating monitoring dashboards:
+- Pre-built dashboard available: [Grafana Dashboard #20716](https://grafana.com/grafana/dashboards/20716-nextcloud/)
+
+### Repository
+https://github.com/xperimental/nextcloud-exporter
+
+### Maintainer
+https://github.com/grotax

community-containers/notifications/notifications.json

@@ -0,0 +1,23 @@
+{
+    "aio_services_v1": [
+        {
+            "container_name": "nextcloud-aio-notifications",
+            "display_name": "Notifications",
+            "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/notifications",
+            "image": "ghcr.io/szaimen/aio-notifications",
+            "image_tag": "v1",
+            "internal_port": "10000",
+            "restart": "unless-stopped",
+            "volumes": [
+                {
+                  "source": "%WATCHTOWER_DOCKER_SOCKET_PATH%",
+                  "destination": "/var/run/docker.sock",
+                  "writeable": false
+                }
+            ],
+            "environment": [
+                "TZ=%TIMEZONE%"
+            ]
+        }
+    ]
+}

community-containers/notifications/readme.md

@@ -0,0 +1,12 @@
+## Notifications
+This container allows other AIO community containers to send admin notifications to Nextcloud users. 
+
+### Notes
+- It needs to be enabled for the [scrutiny container](https://github.com/nextcloud/all-in-one/tree/main/community-containers/scrutiny) for example to make use of admin notifications that are sent if a smartctl failure was found.
+- See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
+
+### Repository
+https://github.com/szaimen/aio-notifications
+
+### Maintainer
+https://github.com/szaimen

community-containers/scrutiny/readme.md

@@ -6,7 +6,7 @@ This container bundles Scrutiny which is a frontend for SMART stats and auto-con
 - ⚠️ This container mounts all devices from the host inside the container in order to be able to access the drives and smartctl stats which is a security issue. However no better solution was found for the time being.
 - This container only works on Linux and not on Docker-Desktop.
 - After adding and starting the container, you need to visit `http://internal.ip.of.server:8000` which will show the dashboard for your drives.
-- It currently does not support sending notifications as no good solution was found yet that makes this possible. See https://github.com/szaimen/aio-scrutiny/issues/3
+- It supports sending notifications in case of a smartctl failure if you enable the notifications community container: https://github.com/nextcloud/all-in-one/tree/main/community-containers/notifications
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack
 
 ### Repository

community-containers/scrutiny/scrutiny.json

@@ -5,7 +5,7 @@
             "display_name": "Scrutiny",
             "documentation": "https://github.com/nextcloud/all-in-one/tree/main/community-containers/scrutiny",
             "image": "ghcr.io/szaimen/aio-scrutiny",
-            "image_tag": "v1",
+            "image_tag": "v2",
             "internal_port": "8000",
             "init": false,
             "restart": "unless-stopped",

community-containers/smbserver/readme.md

@@ -3,7 +3,6 @@ This container bundles an SMB-server and allows to configure it via a graphical
 
 ### Notes
 - This container should only be run in home networks
-- This container currently only works on amd64. See https://github.com/szaimen/aio-smbserver/issues/3
 - After adding and starting the container, you need to visit `https://internal.ip.of.server:5803` in order to log in with the `smbserver` user and the password that you can see next to the container in the AIO interface. (The web page uses a self-signed certificate, so you need to accept the warning). Then type in `bash /smbserver.sh` and you will see a graphical UI for configuring the smb-server interactively.
 - The config data of SMB-server will be automatically included in AIOs backup solution!
 - See https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers how to add it to the AIO stack

community-containers/stalwart/stalwart.json

@@ -48,7 +48,8 @@
             "environment": [
                 "TZ=%TIMEZONE%",
                 "NC_DOMAIN=%NC_DOMAIN%",
-                "STALWART_USER_PASS=%STALWART_USER_PASS%"
+                "STALWART_USER_PASS=%STALWART_USER_PASS%",
+                "CLAMAV_ENABLED=%CLAMAV_ENABLED%"
             ],
             "secrets": [
                 "STALWART_USER_PASS"