fail2ban-cc: add jellyfin

Signed-off-by: Simon L. <szaimen@e.mail.de>

community-containers/fail2ban/fail2ban.json

@@ -25,6 +25,11 @@
                     "source": "nextcloud_aio_vaultwarden_logs",
                     "destination": "/vaultwarden",
                     "writeable": false
+                },
+                {
+                    "source": "nextcloud_aio_jellyfin",
+                    "destination": "/jellyfin",
+                    "writeable": false
                 }
             ]
         }

community-containers/fail2ban/readme.md

@@ -1,5 +1,5 @@
 ## Fail2ban
-This container bundles fail2ban and auto-configures it for you in order to block ip-addresses automatically. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden, if installed.
+This container bundles fail2ban and auto-configures it for you in order to block ip-addresses automatically. It also covers https://github.com/nextcloud/all-in-one/tree/main/community-containers/vaultwarden and https://github.com/nextcloud/all-in-one/tree/main/community-containers/jellyfin, if installed.
 
 ### Notes
 - If you get an error like `"ip6tables v1.8.9 (legacy): can't initialize ip6tables table filter': Table does not exist (do you need to insmod?)"`, you need to enable ip6tables on your host via `sudo modprobe ip6table_filter`.

community-containers/jellyfin/readme.md

@@ -8,6 +8,7 @@ This container bundles Jellyfin and auto-configures it for you.
 - In order to access your Jellyfin outside the local network, you have to set up your own reverse proxy. You can set up a reverse proxy following [these instructions](https://github.com/nextcloud/all-in-one/blob/main/reverse-proxy.md) and [Jellyfin's networking documentation](https://jellyfin.org/docs/general/networking/#running-jellyfin-behind-a-reverse-proxy), OR use the [Caddy](https://github.com/nextcloud/all-in-one/tree/main/community-containers/caddy) community container that will automatically configure `media.$NC_DOMAIN` to redirect to your Jellyfin.
 - ⚠️ After the initial start, Jellyfin shows a configuration page to set up the root password, etc. **Be careful to initialize your Jellyfin before adding the DNS record.**
 - If you have a firewall like ufw configured, you might need to open all Jellyfin ports in there first in order to make it work. Especially port 8096 is important!
+- If you want to secure the installation with fail2ban, you might want to check out https://github.com/nextcloud/all-in-one/tree/main/community-containers/fail2ban
 - The data of Jellyfin will be automatically included in AIO's backup solution!
 - See [here](https://github.com/nextcloud/all-in-one/tree/main/community-containers#community-containers) how to add it to the AIO stack.